Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1 ... 3 4 5 6 7 ... 9
Send Topic Print
Versy's beast (Read 2921 times)
hotprops
Full Member
***
Offline

SuzukiSavage.com
Rocks!

Posts: 180
fort myers fl
Re: Versy's beast
Reply #60 - 02/16/16 at 14:10:13
 
versa, i had the same problem 1500 mile bike like new got stuck 2x. with different causes but similar, same ,in-that it was the white wire harness connectors that came slightly unconnected. once to the decomp plug and second to the ignition switch .i used the 2 and one zip tie method and as good measure did every fing one of them  no problems since the connector keep together clips are a joke at least for the 2009 model year eta on visual inspection you could  not see lack of proper contact till you tuged on it and it came fully apart Angry
Back to top
 
 
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28760
L.A. California
Gender: male
Re: Versy's beast
Reply #61 - 02/16/16 at 14:57:21
 
I got the front fender thinking I may pop the 4 rivets connecting it to the fork bracket and attach it to the vz bracket as it has fork shields on it.

I don't recall checking them on the savage forks but I had checked all that I had... 71 cb500, gs650 that would fit with some minor mods like what dave noted on the goldwing/750 fender.

and there's a chrome vs900? fender that's close too.
the gs series, have slightly wider mounting holes like the 750.
Back to top
 
 
WWW   IP Logged
pg
Serious Thumper
*****
Offline



Posts: 5273
In Transit
Re: Versy's beast
Reply #62 - 02/16/16 at 15:16:18
 
verslagen1 wrote on 02/15/16 at 08:46:35:
I can see why 'bot likes 'em... there as good as the progressives.


No kidding?  What progressives do you have?  I have the intruder shocks as well and was thinking of buying the 12" 412's heavy duty...

Whatcha think?

Best regards,
Back to top
 
 

I don't make the rules, I just know what they are.....




  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28760
L.A. California
Gender: male
Re: Versy's beast
Reply #63 - 02/16/16 at 15:26:17
 
pg wrote on 02/16/16 at 15:16:18:
No kidding?  What progressives do you have?  I have the intruder shocks as well and was thinking of buying the 12" 412's heavy duty...

The 412's I have are too light for me.
I have a set of 418's that are just right.
both are 11", the 418's have better damping then the 412's

I have the intruders set to the lowest preload and I'm thinking of going up 1 click.
They may feel better because of the longer throw and the lighter setting.
Back to top
 
 
WWW   IP Logged
pg
Serious Thumper
*****
Offline



Posts: 5273
In Transit
Re: Versy's beast
Reply #64 - 02/16/16 at 15:28:05
 
Do you have the standard 412's or the heavy duty?  Thanks.

Best regards,
Back to top
 
 

I don't make the rules, I just know what they are.....




  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28760
L.A. California
Gender: male
Re: Versy's beast
Reply #65 - 02/16/16 at 18:17:39
 
pg wrote on 02/16/16 at 15:28:05:
Do you have the standard 412's or the heavy duty?  Thanks.

Best regards,

std
Back to top
 
 
WWW   IP Logged
Ruttly
Serious Thumper
*****
Offline

Thumpers Rule

Posts: 4997
Manteca , CA
Gender: male
Re: Versy's beast
Reply #66 - 02/16/16 at 20:24:58
 
What's in the heart of Versy's Beast,engine mods?
Back to top
 
 

The Topic Terminator
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28760
L.A. California
Gender: male
Re: Versy's beast
Reply #67 - 02/16/16 at 20:35:28
 
Ruttly wrote on 02/16/16 at 20:24:58:
What's in the heart of Versy's Beast,engine mods?

a dash of this, a little of that, eye of newt...
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1291516932
Back to top
 
 
WWW   IP Logged
Ruttly
Serious Thumper
*****
Offline

Thumpers Rule

Posts: 4997
Manteca , CA
Gender: male
Re: Versy's beast
Reply #68 - 02/16/16 at 21:39:55
 
36 or 38 vm ? How much does the beast weigh ? Top speed ? Yes I have to ask because mine is in progress .
Back to top
 
 

The Topic Terminator
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28760
L.A. California
Gender: male
Re: Versy's beast
Reply #69 - 02/16/16 at 22:03:39
 
neither, itsa quicksilver, don't know, don't know.
Back to top
 
 
WWW   IP Logged
Dave
YaBB Moderator
ModSquad
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 17817
Camp Springs, Kentucky
Gender: male
Re: Versy's beast
Reply #70 - 02/17/16 at 13:25:52
 
verslagen1 wrote on 02/16/16 at 18:17:39:
pg wrote on 02/16/16 at 15:28:05:
Do you have the standard 412's or the heavy duty?  Thanks.

Best regards,

std


In case it helps anybody...I finally found out what the spring ratings are for the Progressive 412 shocks.  (It is not published and you have to get a catalog to find out).

The standard rate springs are 120/170, and the Heavy Duty rate is 140/200.

You can get a lighter spring that is 105/150, and a really light 90/130.  (These rates are for the 12.5", 13", 13.5" and 14.25" shocks.    
Back to top
 
 

Someday I will be old......But not today!

  IP Logged
Ruttly
Serious Thumper
*****
Offline

Thumpers Rule

Posts: 4997
Manteca , CA
Gender: male
Re: Versy's beast
Reply #71 - 02/17/16 at 14:04:11
 
Ruttly here, can you tell me about what looks like a dual air filter? Is that home made? More air in more power out,RYCA setup doesn't allow much room for air filter.
Back to top
 
 

The Topic Terminator
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28760
L.A. California
Gender: male
Re: Versy's beast
Reply #72 - 02/17/16 at 15:20:13
 
Ruttly wrote on 02/17/16 at 14:04:11:
Ruttly here, can you tell me about what looks like a dual air filter? Is that home made? More air in more power out,RYCA setup doesn't allow much room for air filter.

yes, dual vw air filter.
somebody with a vintage voodoo build suggested it and it really works for my build.
the 2 filters are connected with a 2" tee and in turn there's a 2" to the carb intake sili rubber transition I got on fleabay.
Back to top
 
 
WWW   IP Logged
Ruttly
Serious Thumper
*****
Offline

Thumpers Rule

Posts: 4997
Manteca , CA
Gender: male
Re: Versy's beast
Reply #73 - 02/17/16 at 21:40:52
 
Would love to see a closer pic of that set up. I have been concerned that my small single filter might not give me the volume needed for my mods. I might have to steal that idea( not so much copy it) but just do my own version of it. The single filter I bought for the bike came in a 2 pack on eBay sorry fleabay so I have a spare,destiny,things happen for a reason!
Back to top
 
 

The Topic Terminator
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28760
L.A. California
Gender: male
Re: Versy's beast
Reply #74 - 02/19/16 at 19:31:02
 
360 lbs
Back to top
 
 
WWW   IP Logged
Pages: 1 ... 3 4 5 6 7 ... 9
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
05/03/24 at 11:08:57



General CategoryRubber Side Down! › Versy's beast


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.