SuzukiSavage.com - Performance Carburetor Kit

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10586
Oklahoma
Gender: male

Performance Carburetor Kit
06/02/12 at 09:29:38

Performance Carburetor Kit

-36/38mm Mikuni VM round slide carburetor
-Custom made throttle cable by Barnett
(there are 3 types depending on the model year of your bike)
-Rubber mounting flange
-Jet container with additional main jets & pilot jets)
-Sudco/Mikuni Carburetor manual
-Spark plug
-Uni Air Filter
Kit price $429

Shipping within the US is included
International shipping is extra; actual cost only determined by your location

Back to top

« Last Edit: 07/11/22 at 03:53:36 by LANCER »

IP Logged

arteacher Serious Thumper Offline Ride as if your naked and invisable! Posts: 2581 London ontario Gender:	Re: Performance Carburetor Kit Reply #1 - 06/02/12 at 10:10:44 What performance improvements can be expected with this kit, including the UFO?
Back to top	white '07, Raask exh, Corbin seat, slipstreamer shie, Raptor, Routy's fwd controls, Baron tach, Frisco bars, Isogrips, Headlight and taillight modulators, Dial-a- jet, AME 9 deg chop kit, K&N air flt IP Logged

Savage_Rob

Serious Thumper
Alliance Member

Offline

Mechanically
Inclined Amateur

Posts: 6972
Texas (Dallas area)
Gender: male

Re: Performance Carburetor Kit
Reply #2 - 06/08/12 at 22:39:14

I don't have the Mikuni but I have an Amal Mk2 which appears to be very similar. For me, the main change is that it's a heck of a lot more responsive. There's no lag while you wait for the diaphragm to pull the needle. This comes at the price of fuel economy but adds simplicity. I'm sure Lancer can give you a more complete answer but that's my short version. I love my roundslide carb.

Back to top

IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10586
Oklahoma
Gender: male

Re: Performance Carburetor Kit
Reply #3 - 06/09/12 at 08:02:10

arteacher wrote on 06/02/12 at 10:10:44:

What performance improvements can be expected with this kit, including the UFO?

The round slide is noticeably more responsive and will flow more fuel/air ... as much as you would ever want for this engine. Potential for power increases is substantial. How much power depends on what you do to other parts, but this carb is more than capable of handling anything you may ever desire to do.
The UFO enhances the efficiency of the low and mid range circuits. That is why a smaller pilot jet is needed with the UFO. It's shape smooths the inside shape of the carb bore which enables the incoming air to move straighter and faster, which picks up the fuel needed more effectively and efficiently. Dyno tests show up to a 1 hp increase for each 100cc of engine displacement. On our 650 this equates to an additional 5-6 hp in the low to mid range...that is a very big bump in almost instantaneous available power. The responsiveness is remarkable. IT JUMPS.
It certainly does take more fuel to make more power but if tuned well the fuel needed to make the power needed to cruise down the road is still the same, so milage can be close to a stock carb setup.

Back to top

IP Logged

Paraquat Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 2206	Re: Performance Carburetor Kit Reply #4 - 06/09/12 at 21:31:11 What? No air filter? --Steve
Back to top	IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10586 Oklahoma Gender:	Re: Performance Carburetor Kit Reply #5 - 06/12/12 at 03:02:35 Paraquat wrote on 06/09/12 at 21:31:11: What? No air filter? --Steve No filter
Back to top	IP Logged

Smokestack Full Member Offline The Devil made me do it! Posts: 244 The Hammer, Canada Gender:	Re: Performance Carburetor Kit Reply #6 - 06/12/12 at 15:15:52 I can vouch for the HP bump; I just put this on, and while it took me a bit to get tuned up, the difference is noticable. Just for kicks, I took a new S40 for a "test ride" at the local stealer... ahem, "dealer", then rode mine home. Definitely a noticable difference.
Back to top	Yup, I done some stuff...... IP Logged

Built2Last Serious Thumper Offline Tempt Fate Posts: 1447 FTF Gender:	Re: Performance Carburetor Kit Reply #7 - 06/16/12 at 16:17:55 Can I use that carb in my aircraft?
Back to top	IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10586
Oklahoma
Gender: male

Re: Performance Carburetor Kit
Reply #8 - 06/16/12 at 18:21:11

It is not an aerobatic carb. Seems like the aircraft carbs I saw ( and its been quite a few years ) had butterfly valves, not slide valves. In an inverted position, purposeful or not, the slide may possibly fail and the float system would be inoperative and result in fuel starvation.
So, probably not a good idea on this one..........but a very interesting question !! Wink

I do love flying.

Back to top

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28752 L.A. California Gender:	Re: Performance Carburetor Kit Reply #9 - 06/16/12 at 18:36:42 the issue with carbs and inverted flying is the float. inverted gravity takes over and shuts off the gas.
Back to top	Versey's Place Tech Section Index IP Logged

grabber_blue YaBB Newbies Offline Posts: 36 Surrey, BC Gender:	Re: Performance Carburetor Kit Reply #10 - 11/16/12 at 13:01:27 Which air filter(s) can you recommend for this carb? Thanks.
Back to top	IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10586
Oklahoma
Gender: male

Re: Performance Carburetor Kit
Reply #11 - 11/16/12 at 14:18:49

grabber_blue wrote on 11/16/12 at 13:01:27:

Which air filter(s) can you recommend for this carb?

Thanks.

I typically use the smallest K&N cone I can get with a 62-64mm flange ID.
Go to the "Universal Air Filter" section on www.knpowersports.com site.
The SN-2570 is a decent one, but choose based on your needs...like is your air box still in the frame or out ? Distance from carb to air box is only about 5" max or slightly less. The space is tight.
You can go a cheaper route with an Emgo stainless mesh filter that is even smaller but does not filter quite as well. They were only about $10 last time I got one from from www.speedmoto.com or they can be found on ebay for $15-20.
Thunder Products has foam filters used on racing dirt bikes for not much as well. Lonn is the owner is a good dude. www.thunderproducts.com.

Back to top

IP Logged

grabber_blue YaBB Newbies Offline Posts: 36 Surrey, BC Gender:	Re: Performance Carburetor Kit: $369.95 Reply #12 - 11/17/12 at 19:09:42 Stock air box is still in place, as is the stock battery box. I wonder if this 60.1mm one could be made to work? Boulevard S40 Savage Pod Style Cone Air Filter
Back to top	IP Logged

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10586
Oklahoma
Gender: male

Re: Performance Carburetor Kit: $369.95
Reply #13 - 11/18/12 at 03:46:33

grabber_blue wrote on 11/17/12 at 19:09:42:

Stock air box is still in place, as is the stock battery box.
I wonder if this 60.1mm one could be made to work?
Boulevard S40 Savage Pod Style Cone Air Filter

Wow, that is quite a mark up on the actual cost.
Speed Moto has an bay store with this same 60mm filter for $10.
Or go to www.speedmotoco.com and check out their website.
They have some cool stuff that we can use on the Savage/s40.

Back to top

IP Logged

grabber_blue YaBB Newbies Offline Posts: 36 Surrey, BC Gender:	Re: Performance Carburetor Kit: $369.95 Reply #14 - 11/18/12 at 12:16:20 ...continued looking and found 60mm Universal Clamp-on Air Filter Pod for $5.99 shipped But thanks for pointing me to Speed Moto. I really didn't have anything else to do today LOL.
Back to top	IP Logged