Armen
Serious Thumper
Offline
Half-Witted Wrench-Jockey from Jersey
Posts: 1452
|
I cut the swingarm brace to clear the larger wheel, then added another cross brace. Had Woody's Wheel works build the wheels. 2.15x18 front, 2.50x18 rear. I used the Chinese Ohlins knockoff shocks that Chris Livengood (?) tarts up and sells. Ditched the 'chick at the crotch Doc' seating position and used a Ryca rearset bracket and some generic rear sets. Modified lower tree to use as upper tree (borrowed the idea from a front end article in the tech session). Race Tech emulators. fork brace, Race Tech for springs. Aluminum adjustable clip-ons. Different master cylinder. Steel braided brake line. R-6 big brake conversion. Saw it in the marketplace section. Kept the belt drive. Modified a Kawi front pulley. Narrowed the pulleys and belt to 1".
|