justin_o_guy2
Serious Thumper
Offline
What happened?
Posts: 55279
East Texas, 1/2 dallas/la.
|
Man,don't make it a science project. Take the cans the corn and green beans came in,use the snips,cut some rectangles,bend them to the pipe. Bend one,then stack one and bend it,or,cut a few and run a clamp down on them and they will conform. If you cut them long,okay,once they are properly radiused then cut them to length. Now you've got a stack of crap you'll never get "In There" unless you stick it all together.. As Dave said JB won't survive the heat,,Ohh well,,you gotta do something,,the clamp should hold the shims in,just don't cut them so skinny as the clamps. Make them wide enough and they will stay. And whatever you can do to get them in and lined up is fair. Even if it's gonna get burnt out. So on the edges,not between,or if there is room and you can drill holes and run a tiny"twist-tie" wire at a couple of corners,,lotsa ways to skin that cat. No reason for it to eat a day.. Even if you Do wind up with a thin layer of JB in there,just keep an eye on it. It's not gonna fly off or go from"Well,gee whiz Wally,it was on there rock solid just a minute ago and now it's just barely even hanging on." Might stink a little. I dunno..
|