Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1 2 3 4 5 6
Send Topic Print
Modified Pulley Spacer (Read 753 times)
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1181

Re: Modified Pulley Spacer
Reply #30 - 12/05/19 at 06:18:54
 
I use Worldwide Bearings in Fairfield NJ.
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
wordet11
Full Member
***
Offline



Posts: 105
Athens, Ohio
Re: Modified Pulley Spacer
Reply #31 - 01/10/20 at 17:32:07
 
PM sent. Thank you for making these. Never realized how much wobble I had on my hub until I read this thread and checked. Can't wait to put one in.
Back to top
 
 
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1181

Re: Modified Pulley Spacer
Reply #32 - 01/10/20 at 19:45:59
 
Cool. Give me an address to send to, and mail me your original when you install mine.
thanks,
-Armen
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
wordet11
Full Member
***
Offline



Posts: 105
Athens, Ohio
Re: Modified Pulley Spacer
Reply #33 - 01/23/20 at 11:27:45
 
Got my new spacer from Armen, snagged a Chinese double row bearing off of ebay for $16.99. Tapped the old bearing out of the hub with an appropriately sized socket and a hammer. Cleaned up the hub, threw it in the oven on 250 Fahrenheit, new bearing in the freezer, waited 45 minutes, dropped right in. Armen's spacer fits perfectly. Really easy fix for a big problem. Thanks again Armen.
Back to top
 
 
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1181

Re: Modified Pulley Spacer
Reply #34 - 01/23/20 at 17:58:12
 
Aw, Excellent! Thanks for the kind words!
I have one more modified spacer in stock, and two not cut yet. Will try to cut them this week. And I think someone owes me one...
So, if anyone needs one, let me know.
And thanks to DBM for coming up with the fix!
-Armen
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
stewmills
Serious Thumper
*****
Offline

Imagination is more
important than
knowledge

Posts: 2551
Auburn, AL
Gender: male
Re: Modified Pulley Spacer
Reply #35 - 01/24/20 at 10:08:44
 
I owe you one!  End of the year got super busy with work (traveling out of state and out of the country) and my house remodel killed all of my free time. Maybe I can find a few minutes in the next week or two to get on this and get you my core.  Sorry for the super long delay!
Back to top
 
 

2008 | 152/52.5ľAir Mix 3/4 | RT6 w/Redline | Seat Lift w/Sheepskin | Speedo Rattle | Rear Pulley Shim | 140/90-15 Rear | Kaw Front Pulley | Relocated Rear Signals

FREEDOM ISN'T FREE!
  IP Logged
Dave
YaBB Moderator
ModSquad
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 15570
Camp Springs, Kentucky
Gender: male
Re: Modified Pulley Spacer
Reply #36 - 01/24/20 at 11:03:26
 
stewmills wrote on 01/24/20 at 10:08:44:
I owe you one! á


Slacker............ Grin
Back to top
 
 

Someday I will be old......But not today!

  IP Logged
stewmills
Serious Thumper
*****
Offline

Imagination is more
important than
knowledge

Posts: 2551
Auburn, AL
Gender: male
Re: Modified Pulley Spacer
Reply #37 - 01/24/20 at 15:01:10
 
Don't I at least get points for being honest and self-reporting?  :'( :'( :'( :'(
Back to top
 
 

2008 | 152/52.5ľAir Mix 3/4 | RT6 w/Redline | Seat Lift w/Sheepskin | Speedo Rattle | Rear Pulley Shim | 140/90-15 Rear | Kaw Front Pulley | Relocated Rear Signals

FREEDOM ISN'T FREE!
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1181

Re: Modified Pulley Spacer
Reply #38 - 01/24/20 at 19:39:28
 
Well....
Kinda sounds like the dog ate your homework :-0
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1181

Re: Modified Pulley Spacer
Reply #39 - 02/10/20 at 17:50:15
 
Well, in an effort to become shockingly rich, and to make all your S40s/Savages the chick magnets they were destined to be, I finished whittling two more rear axle spacers, giving me a total of three to mail out. And if an unnamed slacker ever sends me his stock one, I'll have another.
Same deal, $25 including postage. You send me your stock one.
thanks,
-Armen
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
stewmills
Serious Thumper
*****
Offline

Imagination is more
important than
knowledge

Posts: 2551
Auburn, AL
Gender: male
Re: Modified Pulley Spacer
Reply #40 - 02/13/20 at 07:10:25
 
This weekend.  It is my goal to get this swapped this weekend!  

I will hopefully have my core back in the mail to you Monday, but I am not sure I have your address handy (may be on the original shipping envelope in the shop)?  PM me.

If you open the box and glitter and BBs roll out everywhere consider it a gift for waiting on me so long Grin Grin Grin

Thanks!
Back to top
 
 

2008 | 152/52.5ľAir Mix 3/4 | RT6 w/Redline | Seat Lift w/Sheepskin | Speedo Rattle | Rear Pulley Shim | 140/90-15 Rear | Kaw Front Pulley | Relocated Rear Signals

FREEDOM ISN'T FREE!
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1181

Re: Modified Pulley Spacer
Reply #41 - 02/13/20 at 07:37:21
 
PM sent with address!
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
stewmills
Serious Thumper
*****
Offline

Imagination is more
important than
knowledge

Posts: 2551
Auburn, AL
Gender: male
Re: Modified Pulley Spacer
Reply #42 - 02/13/20 at 07:51:48
 
Got it.

Any other parts you need to hack up while I am sending a package?  I picked up a parts bike a while back (frame, no wheels or tires, no tank, no forks) that had an engine failure due to failed tensioner. Dave has the rocker already, and I don't think I have the right tool to yank out the flywheel (or does it not necessarily require a special tool, just muscle?).

Anyhow, not sure what all is in the boxes of bits but I can dig around if you tell me what you are looking for.
Back to top
 
 

2008 | 152/52.5ľAir Mix 3/4 | RT6 w/Redline | Seat Lift w/Sheepskin | Speedo Rattle | Rear Pulley Shim | 140/90-15 Rear | Kaw Front Pulley | Relocated Rear Signals

FREEDOM ISN'T FREE!
  IP Logged
Armen
Serious Thumper
*****
Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1181

Re: Modified Pulley Spacer
Reply #43 - 02/13/20 at 08:33:47
 
Thanks! I think I'm good for now. Yes, you need a few tools to yank the flywheel. If you want to do a light flywheel, Dave has them and a tool package to rent.
Back to top
 
 

In theory, theory and reality are the same. In reality, they aren't...
  IP Logged
stewmills
Serious Thumper
*****
Offline

Imagination is more
important than
knowledge

Posts: 2551
Auburn, AL
Gender: male
Re: Modified Pulley Spacer
Reply #44 - 02/16/20 at 15:29:23
 
Armen, slight delay getting the spacer off and in the mail. Had a fight with the radial arm saw this morning and my right hand it outta commission for a couple of weeks. Promise to get after this as soon as I am able.

Stew
Back to top
 

20200216_172552.jpg

2008 | 152/52.5ľAir Mix 3/4 | RT6 w/Redline | Seat Lift w/Sheepskin | Speedo Rattle | Rear Pulley Shim | 140/90-15 Rear | Kaw Front Pulley | Relocated Rear Signals

FREEDOM ISN'T FREE!
  IP Logged
Pages: 1 2 3 4 5 6
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
09/19/20 at 01:45:18



General CategoryThe Marketplace › Modified Pulley Spacer


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.