Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› Handlebar fit from RYCA
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
Handlebar fit from RYCA (Read 59 times)
Eegore
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 8324
Handlebar fit from RYCA
04/11/18 at 11:58:19
Will these bars fit on a 1995?
https://shop.rycamotors.com/1_inch_narrow_ape_hangar_handlebars_8_inch_black_dim
pled_for_harley.html
States "Does not fit throttle by wire models" I don't know what that is.
I'm looking to replace the buckhorns with something that isn't so far back but all I can find are Frisco or Z-bars.
Back to top
IP Logged
Gary_in_NJ
Serious Thumper
Offline
LS650 Cafe Racer
Posts: 2633
Amongst the Twisty Roads
Re: Handlebar fit from RYCA
Reply #1 -
04/11/18 at 12:25:22
Some HD's have electric throttles (throttle by wire) that communicate with the ECU, rather than a cable that operates a carb or throttle body (for fuel injection).
The bars you linked are 1" bars, so they should be plug-n-play.
Back to top
A life-time student of motorcycling.
LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS
My LS650=>
http://suzukisavage.com/yabb2.2/Attachments/Left.JPG
IP Logged
Eegore
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 8324
Re: Handlebar fit from RYCA
Reply #2 -
04/11/18 at 12:34:35
I wasn't sure if the dimples would be an issue either.
What I want is the buckhorns to have less pullback and drop. If I could pry them forward it would be fine. Unfortunately all I can do is guess as to what bar will fit that best.
Back to top
IP Logged
batman
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 3806
osceola new york
Gender:
Re: Handlebar fit from RYCA
Reply #3 -
04/11/18 at 12:43:03
If the handle bars are knurled ,you may not want them as HD risers are set closer ,so the knurling will show inside the Suzuki risers.
Back to top
my old work mates called me MacGyver
IP Logged
Shrulk
Junior Member
Offline
SuzukiSavage.com
Rocks!
Posts: 59
Re: Handlebar fit from RYCA
Reply #4 -
04/11/18 at 18:21:15
[img]I bought 1in bars called the 9"mini apes. Paid about $100 shipped and love them. As batman said the HD bars will show the knurling outside of the risers if you care. I dont.
Back to top
IP Logged
Eegore
Serious Thumper
Offline
SuzukiSavage.com
Rocks!
Posts: 8324
Re: Handlebar fit from RYCA
Reply #5 -
04/11/18 at 19:21:34
Im not too concerned about the knurling showing. Do you have an image of the 9" apes installed?
Back to top
IP Logged
Quantm1366
YaBB Newbies
Offline
SuzukiSavage.com
Rocks!
Posts: 8
Re: Handlebar fit from RYCA
Reply #6 -
04/11/18 at 21:15:16
Was the cabling for the controls long enough? I wanted a similar type bar, but didn't want to have to re-cable everything.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
09/20/24 at 15:15:50
›
General Category
›
Rubber Side Down!
› Handlebar fit from RYCA
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.