SuzukiSavage.com - Handlebar fit from RYCA

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Handlebar fit from RYCA

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Handlebar fit from RYCA (Read 59 times)

Eegore Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 8010	Handlebar fit from RYCA 04/11/18 at 11:58:19 Will these bars fit on a 1995? https://shop.rycamotors.com/1_inch_narrow_ape_hangar_handlebars_8_inch_black_dim pled_for_harley.html States "Does not fit throttle by wire models" I don't know what that is. I'm looking to replace the buckhorns with something that isn't so far back but all I can find are Frisco or Z-bars.
Back to top	IP Logged

Gary_in_NJ Serious Thumper Offline LS650 Cafe Racer Posts: 2626 Amongst the Twisty Roads	Re: Handlebar fit from RYCA Reply #1 - 04/11/18 at 12:25:22 Some HD's have electric throttles (throttle by wire) that communicate with the ECU, rather than a cable that operates a carb or throttle body (for fuel injection). The bars you linked are 1" bars, so they should be plug-n-play.
Back to top	A life-time student of motorcycling. LS650 Cafe, DRZ400SM, FZ6N, SV650S, CB900C, Ducati ST2, CB550F-SS My LS650=> http://suzukisavage.com/yabb2.2/Attachments/Left.JPG IP Logged

Eegore Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 8010	Re: Handlebar fit from RYCA Reply #2 - 04/11/18 at 12:34:35 I wasn't sure if the dimples would be an issue either. What I want is the buckhorns to have less pullback and drop. If I could pry them forward it would be fine. Unfortunately all I can do is guess as to what bar will fit that best.
Back to top	IP Logged

batman Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 3806 osceola new york Gender:	Re: Handlebar fit from RYCA Reply #3 - 04/11/18 at 12:43:03 If the handle bars are knurled ,you may not want them as HD risers are set closer ,so the knurling will show inside the Suzuki risers.
Back to top	my old work mates called me MacGyver IP Logged

Shrulk Junior Member Offline SuzukiSavage.com Rocks! Posts: 59	Re: Handlebar fit from RYCA Reply #4 - 04/11/18 at 18:21:15 [img]I bought 1in bars called the 9"mini apes. Paid about $100 shipped and love them. As batman said the HD bars will show the knurling outside of the risers if you care. I dont.
Back to top	IP Logged

Eegore Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 8010	Re: Handlebar fit from RYCA Reply #5 - 04/11/18 at 19:21:34 Im not too concerned about the knurling showing. Do you have an image of the 9" apes installed?
Back to top	IP Logged

Quantm1366 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	Re: Handlebar fit from RYCA Reply #6 - 04/11/18 at 21:15:16 Was the cabling for the controls long enough? I wanted a similar type bar, but didn't want to have to re-cable everything.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home