batman
Serious Thumper
Offline
SuzukiSavage.com Rocks!
Posts: 3806
osceola new york
Gender:
|
Chris , to raise the needle and get more fuel in the mid range ,you need to reduce the spacer, you need to either sand the spacer down, or replace it with 2 -3 washers . by adding the spacer and a washer your starving the mid range of fuel (that's why your plug shows lean) increasing your main jet won't help much if the needle isn't moving up enough. remove the spacer and put two washers(based on your 120ft elevation)in instead ,and see if your problems go away.I'd use the 145 main for now, but you'll end up using 150 ,152.5 later for WOT performance.
|