That is how ya finally get a head a little . I made my Versey before I found out versey was doing them . you got a buddy with a welder ? If not plan on dropping by next time your in my neighborhood . From a cooled off motor we can have ya ready to crank-up in two hours.
Procedure:
1. Lay bike on its left side
2. remove foot peg , clutch cable , and side cover
3. tensioner out , and add extra tab .
4. cut that spring so its not long enough to push too far anymore.
5. re-install tensioner
6. put on form-a-gasket and let it set 5 minutes
7. put side cover back on finger tight
8. put clutch cable , + foot peg on
9. walk away for an hour, go have lunch
10 Tighten side cover bolts and ride !
its easy