SuzukiSavage.com - What metal to use for cam tensioner mod?

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › What metal to use for cam tensioner mod?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

What metal to use for cam tensioner mod? (Read 79 times)

Ikarus YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 11	What metal to use for cam tensioner mod? 01/09/23 at 14:41:12 hello everyone. It’s time for me to do the tensioner mod. The tensioner actually almost fell out but I fought it in time. Going to make the bracket but not sure what kind of metal I’m supposed to use. Is it any kind of steel will do? Thanks.
Back to top	IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 17802 Camp Springs, Kentucky Gender:	Re: What metal to use for cam tensioner mod? Reply #1 - 01/10/23 at 04:41:08 Do you have tools? Welder, hacksaw, grinder.....drill?
Back to top	Someday I will be old......But not today! IP Logged

Ikarus YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 11	Re: What metal to use for cam tensioner mod? Reply #2 - 01/10/23 at 07:12:05 I don’t have a welder but I have everything else. Planning on making the bracket and then having someone else weld it. That’s why I just need to know what metal to use.
Back to top	IP Logged

SpamyToo Full Member Offline Posts: 231	Re: What metal to use for cam tensioner mod? Reply #3 - 01/10/23 at 07:20:26 Some version of steel. We used just plain steel plate, and also made one from a handle of a crescent wrench. Both have held up for more than 5 years now.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28754 L.A. California Gender:	Re: What metal to use for cam tensioner mod? Reply #4 - 01/10/23 at 08:17:08 304L does very well, but any mild steel will do.
Back to top	Versey's Place Tech Section Index IP Logged

ohiomoto

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 2681
WTF is JOG?

Re: What metal to use for cam tensioner mod?
Reply #5 - 01/11/23 at 21:11:05

Ikarus wrote on 01/10/23 at 07:12:05:

I don’t have a welder but I have everything else. Planning on making the bracket and then having someone else weld it. That’s why I just need to know what metal to use.

-----

By the time you source the material, spend your time and pay to have it welded, you might be better off just buying one from varslegen1.

Another option is the Drag Bike Mike jack bolt. No welding is required. Just drilling and tapping...and tearing down your top end (I think).

IP Logged

DragBikeMike

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 4166
Honolulu

Re: What metal to use for cam tensioner mod?
Reply #6 - 01/12/23 at 00:01:17

While I am fond of my jack bolt, it is waaaay harder to do than the Verslagy. Verslagen's tensioner is a sweet deal. I did the jack bolt because I wanted the versatility to shorten the cylinder or mill the head. Very few will need that versatility. The Verslagen CCT is inexpensive, solves the failure problem, and captivates the plunger for an added measure of security. It's the way to go.

Knowledge is power.

IP Logged

och Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 614	Re: What metal to use for cam tensioner mod? Reply #7 - 01/21/23 at 19:41:15 What's the mileage on your bike that the tension is almost falling out?
Back to top	IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home