SuzukiSavage.com - Cut out when put into gear

SpamyToo

Full Member

Offline

Posts: 231

Re: Cut out when put into gear
Reply #15 - 07/17/22 at 07:39:09

I have a 95 and my kickstand doesnt look anything like that.

Sooooo, not sure what to tell you.

Either its an aftermarket stand and they already shorted the wires farther up, or perhaps I just havent seen one like that.

You may have to trace some wires.

Did this just start happening out of the blue?

Clutch adjusted ok? Broken clutch push rod? Neutral switch?

Back to top

IP Logged

Niallmac

YaBB Newbies

Offline

Posts: 25
UK

Re: Cut out when put into gear
Reply #16 - 07/17/22 at 08:41:29

I've not ridden it since I bought it in 2014 as a donor bike for a RYCA kit.

It was finally re-visited late last year. I'm just checking with the guy that did the work whether he rode it. More recently it needed a new coil and carb de-gunged as it's been standing too long.

Clutch seems fine. You can push it in gear. Also the neutral works (including the light).

I'm pretty sure the engine and stand are not messed with as part of the kit.

N

Back to top

IP Logged

SpamyToo

Full Member

Offline

Posts: 231

Re: Cut out when put into gear
Reply #17 - 07/18/22 at 11:30:50

So this has a ryca kit? If so they have removed the kickstand switch and shorted the wires together.

If their shorting job is coming loose you may be having some issue there.

The stock kickstand is way too short for any of the cafe kits so they remove the mount and use their own. The kickstand switch is usually removed from all the ones Ive seen.

Back to top

IP Logged

Niallmac

YaBB Newbies

Offline

Posts: 25
UK

Re: Cut out when put into gear
Reply #18 - 07/18/22 at 13:07:42

SpamyToo wrote on 07/18/22 at 11:30:50:

So this has a ryca kit? If so they have removed the kickstand switch and shorted the wires together.

If their shorting job is coming loose you may be having some issue there.

The stock kickstand is way too short for any of the cafe kits so they remove the mount and use their own. The kickstand switch is usually removed from all the ones Ive seen.

Ah, ok that would explain it. Thank you. Do you know what colour leads I should be looking for please?

Cheers
Niall

Back to top

IP Logged

justin_o_guy2

Serious Thumper

Offline

What happened?

Posts: 55279
East Texas, 1/2 dallas/la.

Re: Cut out when put into gear
Reply #19 - 07/18/22 at 13:39:08

If, in your trouble shooting, you decide you need to turn the key on for a while, you might want to disconnect the ignition module. They can die if the key is on for too long. I Think it only happens if the piston is at TDC,and since it's a wasted spark ignition, it's going to fire the plug on exhaust, too. I'm pretty sure it's not gonna cook it if it's not at TDC and continuously firing the plug, but that thing is expensive and unplugging it is Really cheap, so I would unplug it.
I'm following this thread several times a day. Looking forward to you telling us what the deal Was.

Back to top

The people never give up their liberties but under some delusion.- Edmund Burke.

IP Logged

Ruttly Serious Thumper Online Thumpers Rule Posts: 5006 Manteca , CA Gender:	Re: Cut out when put into gear Reply #20 - 07/18/22 at 13:43:09 It might have Ryca clutch bypass too I think they repurposed the relay so it can’t be started unless clutch is disengaged. I can’t remember, look on utube for Ryca videos they called it the clutch mod
Back to top	The Topic Terminator IP Logged

Niallmac YaBB Newbies Offline Posts: 25 UK	Re: Cut out when put into gear Reply #21 - 07/18/22 at 13:52:08 I think it was an early Ryca kit so it may not have a clutch mod. I’ll check…
Back to top	IP Logged

Ruttly Serious Thumper Online Thumpers Rule Posts: 5006 Manteca , CA Gender:	Re: Cut out when put into gear Reply #22 - 07/22/22 at 10:57:18 That’s a Ryca kickstand the relay maybe under the tank near the coil
Back to top	The Topic Terminator IP Logged

Niallmac YaBB Newbies Offline Posts: 25 UK	Re: Cut out when put into gear Reply #23 - 07/22/22 at 11:02:40 Ruttly wrote on 07/22/22 at 10:57:18: That’s a Ryca kickstand the relay maybe under the tank near the coil Interesting as I had the coil changed recently. I wonder if some was displaced…
Back to top	IP Logged