DragBikeMike
Serious Thumper
Offline
SuzukiSavage.com Rocks!
Posts: 4194
Honolulu
|
Armen, that is exactly what I did. I calculated the volume of a cylinder 3.819" diameter, .095" tall. Then I compared that to the measured volume of oil. That measured volume included one additional cc of valve relief volume. Then I compared one value to another.
The geometric calculation of the pop-top was 6.5 cc while the direct oil measurement showed 7.3 cc. It was an 0.8 cc difference. Since the pop-top has beveled edges I felt that the geometric calculation was less accurate so I used the direct measurement with oil. Subtract the volume of the reliefs (1 cc) and you end up with 6.3 cc.
|