batman wrote on 07/29/19 at 21:57:19:AA15 when you replaced the lower end of the clutch cable did you place both the nuts on top of the ledge ,one is the adjustment ,the other one to lock it in place ,as all the force is applied to the top side when you pull in the handle bar lever , if you placed one on each side it can break the ledge and the lever won't return.
Hmmm... So did I have both asjustment bolts screwed all the way to the top after I put the clutch in? No I don't think so, might've even had them all the way down. To try and take slack out of the cable to make the lever sit higher when the clutch was worn. If this is the case what would need to be replaced?
For some reason I have a feeling that if I take the return spring off it will work again, it felt different after riding for a bit, like it fell into place somehow and is working normally. I'm going to check soon