From the looks of those hoses on the vents.....somebody has been fooling around with that carb before you got to it.
Here are stock carb specs:
http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1098869040You most likely don't need a rebuild kit - just a good cleaning to get the crud out. Most rebuild kits don't likely have the proper jets anyhow.
I would suggest starting with a #150 main, and a #52.5 pilot jet if you are near sea level....over 2,000 feet a #50 pilot. Then replace the white spacer on the needle with 3 washers (size #3 machine screw - get steel as brass often has too big of an outside diameter). If you end up having a slight lean surge at very low throttle settings - remove 1 steel washer and try running just 2 washers.
Can you show me a photo of the other side of the carb? I want to see if somebody took out the brass plug over the mixture screw......and see if there is a port for the charcoal canister on the California model carb.