SuzukiSavage.com - Carb Cleaning Thoughts....

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Carb Cleaning Thoughts....

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Carb Cleaning Thoughts.... (Read 44 times)

edison

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 25

Carb Cleaning Thoughts....
05/30/18 at 17:43:43

First off, thanks to all here who assisted me with great advice for cleaning my carb....the bike is now running very well!
Without the assurance of technical support here, I doubt I would have tried taking it apart and cleaning it myself. The one issue I had was taking out the float pivot pin - I believe it was bucked in place....I took a Dremel tool to it to take it down but stopped because I didn't want to break the mount after trying to tap it out.

Anyway, I have one left over washer that I can't seem to place....it fell off when I moved the seat or tank....does anyone recognize it? Roll Eyes

IMG_20180530_202345.jpg

IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28755 L.A. California Gender:	Re: Carb Cleaning Thoughts.... Reply #1 - 05/30/18 at 17:48:18 Oh no! Not that! that's the speedo seal. you'll have to disassemble half the engine to put it back. jk, remove the speedo cable from the case and put it in the bottom of the cable.
Back to top	Versey's Place Tech Section Index IP Logged

edison YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 25	Re: Carb Cleaning Thoughts.... Reply #2 - 05/30/18 at 17:58:34 Thanks! You had me there for a second.... PS - flat side in first, grooved side toward case...right?
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28755 L.A. California Gender:	Re: Carb Cleaning Thoughts.... Reply #3 - 05/30/18 at 18:50:42 edison wrote on 05/30/18 at 17:58:34: Thanks! You had me there for a second.... PS - flat side in first, grooved side toward case...right? Yes, grooved side always goes to the pressure side. It energizes the seal.
Back to top	Versey's Place Tech Section Index IP Logged

edison YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 25	Re: Carb Cleaning Thoughts.... Reply #4 - 05/30/18 at 18:59:46 Thanks again....good principle to know about seal construction!
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Carb Cleaning Thoughts.... Reply #5 - 05/30/18 at 20:45:57 verslagen1 wrote on 05/30/18 at 17:48:18: Oh no! Not that! that's the speedo seal. you'll have to disassemble half the engine to put it back. jk, remove the speedo cable from the case and put it in the bottom of the cable. DUDE! That's funny
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home