JutMan
Junior Member
Offline
SuzukiSavage.com Rocks!
Posts: 96
Poconos
Gender:
|
Installation Instructions TBKS4 First, the clutch must be removed, if someone does not know how to do it he can download the manual from Buchelli here. So the engine must look before installation. For the next step following components are used, the holding plate, two washers and the imaged Screws. The longer of the two allen countersunk screws and beiligende Machine screw are inserted through the respective holes, for countersunk screw the mounting plate is specially prepared. Thereafter, the two washers are pushed, the lower Machine screw serves currently only for fixation and is as described on page five built. The countersunk screw must with Loctite HEAVY KNOCKED DOWN are used. ABSOLUTELY As I said, the lower screw is at the moment only for fixing so that the holding plate is properly seated. The countersunk screw (Loctite) Tighten properly. Then must the machine screw to be removed again. Now the tensioner bracket and the Quick Senkschraube be hand. In the previously mounted holding plate is now the tensioner assembled. The short countersunk screw will be described with Loctite as before glued and tightened again afterwards easily geöf fnet so that the clamps can still move just like that. Now the upper clamp is connected to the clamping rail, Also the existing screw is used. Then the machine screw with the thick washer provided and screwed. (Making sure that the small Washer is available behind the mounting plate yet) Now the timing chain by shifting the clamping rail Criminal f set and then the lower machine screw tightened. Finally, the plastic strip is removed on a stretcher head so This is unlocked. V or the assembly is essential to check whether the Clutch basket properly rotates. W be hen the system is installed, it must be adjusted ( ) For this purpose, the lower screw is only a little tightened, the clamps must clean every whit. Then the bottom of the must with a screwdriver Slot (yellow arrow) are so far displaced by the tensioner 3 teeth popping, which is quite important otherwise the timing chain to Criminal f stretched. IMPORTANT WARNING: When coupling cage, if the Drive the oil pump falls signature like here on the drawing to see again is.
|