batman
Serious Thumper
Offline
SuzukiSavage.com Rocks!
Posts: 3806
osceola new york
Gender:
|
Troyrr, My answer above was addressing Lunar's problem.(he is at sea level and he is running stock jets ). I would order/find/ replace, the washer that is missing on the needle for starters ( not having the washer in place will effect your needle position). Then jet your carb to your, elevation /air cleaner / exhaust, which details you have not stated . Do I think your problem is the same as Lunar's ? the answer is no , there both fuel related, but flames shooting out the exhaust can be from running to rich Lunar's problem ,or to lean ,your problem .The missing washer allows the clip and therefore the needle to move down inside the spring, dropping your needle rather than holding it up against the spacer, the side moves up sending more air ,but the needle isn't moving away from the main jet ,your fuel mix is so lean it doesn't fire and gets pushed in to the exhaust where the hot pipe makes it explode , sending flames out your muffler, and that's also why changing jets (no matter what size)has had no effect.
|