There are some links to sellers sites, if you got anti spam it might not let you in... I'll have to try some things... let me know if this thread disappears.
Boule’tard wrote on 11/30/09 at 21:18:34:Ok guys, I finally got the Thanksgiving pies baked and that stupid dishwasher installed and most importantly, replaced the battery on my bike with a small one and mounted it on the "shelf" or emissions/muffler mount thingy below the swingarm.
On some other thread I mentioned that the largest battery that would fit there is a Yuasa YTZ7S. There are smaller batteries of different chemistry that are a little smaller and still provide enough starting amperage, but they cost a fortune. The Yuasa is also sold for a few bucks less as the Motocross YTZ7S. Still made in Japan by Yuasa.
Quote:Some other things I gathered were the connectors and a boot for the + terminal. The connectors are for 6 gauge wire which is larger than necessary, but I had to cram a couple extra wires in there for the horn relay. There is also an extra wire that goes from the negative terminal to the brain box. I didn't know what kind of boot to get, so I just cut the stock one to match the connector and battery.
Quote:A few other supplies are some 3/8" threaded rod, a couple of wingnuts to match, and some 1 3/8" wide, 1/16" thick metal stock with the 3/8" holes. I didn't get a picture of the 8 gauge wire or heat shrink insulation, but obviously you need some electical stuff not shown.