SuzukiSavage.com - From Lien to Bobber to Cafe: RYCA Build

Gyrobob Serious Thumper Offline Posers ain't motorcyclists Posts: 2571 Newnan, GA Gender:	Re: From Lien to Bobber to Cafe: RYCA Build Reply #315 - 12/08/11 at 18:05:51 Are any of the lithium ion batteries small enough to fit in the tailpiece?
Back to top	If you think there's good in everyone, you haven't met everyone. IP Logged

RpNSht

Ex Member

Re: From Lien to Bobber to Cafe: RYCA Build
Reply #316 - 12/09/11 at 00:23:14

Gyrobob wrote on 12/08/11 at 18:05:51:

Are any of the lithium ion batteries small enough to fit in the tailpiece?

not sure. maybe the one im using could but that would involve a different mounting system. my battery box pretty much disappeared once it was powder coated that i didnt even consider tucking the battery in the tail

Back to top

IP Logged

sbaugz Ex Member	Re: From Lien to Bobber to Cafe: RYCA Build Reply #317 - 12/09/11 at 03:29:10 Gyrobob wrote on 12/08/11 at 18:05:51: Are any of the lithium ion batteries small enough to fit in the tailpiece? ballistic batteries would fit inside. THey have a 4 cell pack that would definately fit. $100 and has a 2 year warranty.
Back to top	IP Logged

Scott_H Full Member Offline SuzukiSavage.com Rocks! Posts: 130 Escondido, CA Gender:	Re: From Lien to Bobber to Cafe: RYCA Build Reply #318 - 12/09/11 at 09:10:22 Tried to PM you about the battery box but PM doesn't seem to be working. Can you give me a call? Thanks, Scott 760-215-0331
Back to top	IP Logged

teabowl13

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 535

Re: From Lien to Bobber to Cafe: RYCA Build
Reply #319 - 12/09/11 at 11:18:42

sbaugz wrote on 12/09/11 at 03:29:10:

Gyrobob wrote on 12/08/11 at 18:05:51:

Are any of the lithium ion batteries small enough to fit in the tailpiece?

ballistic batteries would fit inside. THey have a 4 cell pack that would definately fit. $100 and has a 2 year warranty.

I was just looking at those last night and wondering much the same thing. I didn't want to Hi-jack Ripn's thread here, so I started a new one...
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1323457929

Back to top

VINTAGE ROADSTER BUILD: http://suzukisavage.com/cgi-bin/YaBB.pl?num=1323582921

IP Logged

RpNSht Ex Member	Re: From Lien to Bobber to Cafe: RYCA Build Reply #320 - 12/09/11 at 14:26:07 Scott_H wrote on 12/09/11 at 09:10:22: Tried to PM you about the battery box but PM doesn't seem to be working. Can you give me a call? Thanks, Scott 760-215-0331 i got your message- just pm'd you with a response
Back to top	IP Logged

RpNSht

Ex Member

Re: From Lien to Bobber to Cafe: RYCA Build
Reply #321 - 12/09/11 at 14:27:36

teabowl13 wrote on 12/09/11 at 11:18:42:

sbaugz wrote on 12/09/11 at 03:29:10:

Gyrobob wrote on 12/08/11 at 18:05:51:

Are any of the lithium ion batteries small enough to fit in the tailpiece?

ballistic batteries would fit inside. THey have a 4 cell pack that would definately fit. $100 and has a 2 year warranty.

I was just looking at those last night and wondering much the same thing. I didn't want to Hi-jack Ripn's thread here, so I started a new one...
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1323457929

good looking out-thanks

Back to top

IP Logged

RpNSht Ex Member	Re: From Lien to Bobber to Cafe: RYCA Build Reply #322 - 12/10/11 at 10:25:05 two more future happy customers: contact me if interested in getting your triple tree plugged
Back to top	IP Logged

RpNSht

Ex Member

Re: From Lien to Bobber to Cafe: RYCA Build
Reply #323 - 12/11/11 at 18:53:55

im addicted:
i needed a rear hub for my xs650 hard tail build, so i decided to buy the rest of an '81 xs650 to go with it. this will get turned into a mono shock cafe racer, after the hard tail build, after my cs-1 build; that is of course if my painter ever decides to finish....grrrrrrrr :'(

i want to be able to include my cs-1 here:
http://rycamotors.com/bikes/customerbuilds/index.html

Back to top

IP Logged

RpNSht Ex Member	Re: From Lien to Bobber to Cafe: RYCA Build Reply #324 - 12/13/11 at 23:40:23 who needs sexting when you can get images like this sent to you!!!!
Back to top	IP Logged

teabowl13 Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 535	Re: From Lien to Bobber to Cafe: RYCA Build Reply #325 - 12/14/11 at 05:31:32 FINALLY! By the way... I sent a PM with my contact info, not sure if it got through to you... I know it's not bike related, but I'll post a link to my website for you if you want...
Back to top	VINTAGE ROADSTER BUILD: http://suzukisavage.com/cgi-bin/YaBB.pl?num=1323582921 IP Logged

RpNSht Ex Member	Re: From Lien to Bobber to Cafe: RYCA Build Reply #326 - 12/17/11 at 16:22:22 i got word from my painter: ...
Back to top	IP Logged

RpNSht

Ex Member

Re: From Lien to Bobber to Cafe: RYCA Build
Reply #327 - 12/20/11 at 00:15:46

guess what was ready for pick up?????

anxious to get back on the ROAD! i went straight to the garage after picking up the tins and got to work. an hour later STASIS IS DEATH was back ...and back we are!!!!

notice the stock fender bobbed and painted black matching the ignition plate on the tank and seat...turned out awesome!

already got love at the gas station and i was only on the road for 45minutes hahahah

there may be a few adjustments but for now im pretty stoked on the build. the color is crazy!?!?!? sometimes it looks grey other times it looks light purple while still at other times its gun metal gleaming rose. im looking forward to seeing it in the sunlight

Back to top

IP Logged

RpNSht

Ex Member

Re: From Lien to Bobber to Cafe: RYCA Build
Reply #328 - 12/20/11 at 00:22:35

MotoBuddha wrote on 12/05/11 at 07:10:10:

wheelchairstuntn wrote on 10/21/11 at 13:35:09:

Turned Down:

Some of you may remember my posting about my busted chucks (http://suzukisavage.com/cgi-bin/YaBB.pl?num=1304297812/239#239) as a result of the knurled pegs on the ryca rear sets. I love knurled anything but i cant afford to bust my shoes every time i go for a ride; my left chuck now looks more like a sandal than a shoe. to help save my future shoes i ended up turning down the left peg, kissing off the knurled surface Sad

the peg use to look like this:
http://i1226.photobucket.com/albums/ee419/rpnsht/photo-6-1.jpg

it now looks like this:
http://i1226.photobucket.com/albums/ee419/rpnsht/photo-7-1.jpg

My solution -- heat shrink.

http://i280.photobucket.com/albums/kk182/motobuddha/7b9a5af3.jpg

im apart of the club too

Back to top

IP Logged

sbaugz Ex Member	Re: From Lien to Bobber to Cafe: RYCA Build Reply #329 - 12/20/11 at 04:56:14 lookin good
Back to top	IP Logged