Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
Headlight Rattle Fix (Read 296 times)
matt
Full Member
***
Offline

da na na na na
mattman

Posts: 228
Winter Springs, FL
Gender: male
Headlight Rattle Fix
10/22/10 at 15:43:02
 
this drives me nuts, it drowns the sound of engine and sounds like crap...

Here is my QUICK FIX to the issue:

supplies:
phillips screw driver
muffler packing
muscle or knife...


step one: remove light by two screws on bottom sides of bowl.

step two: use muscle (or knife) to rip a few shreds of muffler packing, i ended up using three peices about 2x3, doeasnt have to be perfect.. its just a cushion!

step three:
shove one peice in the bottom of bowl, put the light in, but dont close all the way, in the opening at the top shove the rest of muffler packing in there.

step four: close it all up

step five: enjoy

Grin Grin Grin Grin Shocked Cool Kiss Cool Shocked Grin Cheesy
Back to top
 
« Last Edit: 11/20/10 at 06:53:22 by Oldfeller--FSO »  
  IP Logged
Oldfeller--FSO
Serious Thumper
ModSquad
*****
Offline

Hobby is now
"concentrated
neuropany"

Posts: 12627
Fayetteville, NC
Gender: male
Re: Headlight Rattle Fix
Reply #1 - 11/21/10 at 22:36:21
 

Curious as to the long term heat effects on the bulb and the reflector -- they get hot enough in use and you just packed all around yours with some insulator material that is gonna isolate all that heat in the bulb and reflector area even more.

Update this tread please with a time update please after you go through a summer heat cycle or two.

Anyone who does this with a high intensity bulb like a Sylvania Silverstar chime in on any heat effects on bulb life, etc .....

Thanks,

Oldfeller
Back to top
 
 

Former Savage Owner
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28732
L.A. California
Gender: male
Re: Headlight Rattle Fix
Reply #2 - 11/21/10 at 23:52:45
 
I've used the Sylvania Silverstar for about 3 yrs.
The face of the lens gets hot enough to melt a bike cover.
But while the back is warm, it's not hot.

In defense of the method, very little cooling occurs from the back side.
And since the reflector is metal, there's little impact of it getting hot other that the possibility of the reflector being damaged due to heat induced corrosion.  Adding muffler packing, which would serve as an insulator, would benefit the headlight shell.
Back to top
 
 
WWW   IP Logged
Oldfeller--FSO
Serious Thumper
ModSquad
*****
Offline

Hobby is now
"concentrated
neuropany"

Posts: 12627
Fayetteville, NC
Gender: male
Re: Headlight Rattle Fix
Reply #3 - 11/22/10 at 05:52:46
 

Me too on the Silverstar, and yes they do get pretty hot.  

Isn't some of the clip and bulb retaining stuff on the back of the reflector (where you change the bulb) made of thermoset plastic on some year models?  Thermoset might embrittle over time but it wouldn't melt on you I wouldn't think.  Same sort of stuff is used in handles on kitchen pans ....

Original Silverstars got a rep for relatively short bulb life, Sylvania had to put a durability warranty on the second generation to encourage people to buy them (still got mine, but I think like Verslagen mine has lasted longer than the promised warranty period).

Point is all the insulation stops back side cooling of the bulb and mounting parts and they will get hotter than they normally would.  

Worth a follow up post anyway after he has some time on it.

Back to top
 
 

Former Savage Owner
  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
03/28/24 at 13:21:20



General CategoryRubber Side Down! › Headlight Rattle Fix


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.