Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1 2 
Send Topic Print
cam chain length variables??? (Read 72 times)
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28770
L.A. California
Gender: male
Re: cam chain length variables???
Reply #15 - 01/29/07 at 16:45:05
 
Did I read right? You had the 87 head on the 97 and the tensioner stuck out 18mm?
Then put the 97 head on the 97 with new chain and now tensioner sticks out 8mm.
How about swapping the heads again to check?
It could be that the 87 head sprocket is really worn.
Or put the new chain on the 87.  If loose it might be the sprockets or guides.
Then try the old 97 chain on the 87.  If its looser then the new, then it's the chain.
Back to top
 
 
WWW   IP Logged
steveh
Ex Member




Re: cam chain length variables???
Reply #16 - 02/01/07 at 07:04:29
 
The engine is back together now except for the head cover and the side covers, so I'm going to leave it as is for now. I used the same camshaft and sprockets as were on before, and I reused the plastic tensioners/guides. So the variables were: 97 head reinstalled on the bike (87 had been installed by the po), new head gasket, new cam chain, new head gasket. It's still mysterious to me, but it seems ok now, so I'm going to get the bike back together and see what happens when I put it on the road?
Back to top
 
 
  IP Logged
Reelthing
Serious Thumper
Alliance Member
*****
Offline

Fish or ride that is
the question

Posts: 5397
Houston,Tx
Gender: male
Re: cam chain length variables???
Reply #17 - 02/01/07 at 07:24:38
 
I remember Anderson selling discontinued cylinders awhile back - seemed suzuki had rev'd it along the way but have no idea what was changed

another possible place is the 87 cam "bearings" are worn enough to move the cam sprocket
Back to top
 
 
  IP Logged
Pages: 1 2 
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
05/08/24 at 16:19:32



General CategoryRubber Side Down! › cam chain length variables???


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.