Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1 2 
Send Topic Print
Aftermarket Parts interchange... (Read 2126 times)
WD
Serious Thumper
2005 No Login
*****
Offline

Professional
"scooter
trash".

Posts: 5207
Rosemark TN
Gender: male
Aftermarket Parts interchange...
07/06/05 at 19:30:28
 
Since this IS technical...

OIL FILTER, Suzuki PN 16510-37440, Emgo PN 10-85900.
Fits: DR500 X/SX/SZ/D 81-83; DR600 S/R 85-88; DR650N 89-92; DR700S 88-94; LS650/S40 86-up; SP500 81-83; SP600 85.

Says right on the filter box: For the best engine protection we recommend that you replace your oil filter when you change your oil. DO NOT exceed 1500 miles without checking AND changing this filter.

REAR BRAKE SHOES, Suzuki PN 64410-11300/11301, Emgo PN 92-41005, EBC PN 606. Fits: GS425N/EN 78-80; GSX400LX/SX 81; GN400 80-82; GS450E/L 80-83; GR650D/XD 83; GS450G 82-85; GS450LF 85; GS550LD/LF 83-85; GT250EN-EX 78-81; GS250,GSX250ET-EZ 79-82; GS450ST/SX 80-81; GS450TX/TXZ/TXD, GS400ET-EZ 81-83; GS300 82,83,85; LS650/S40 ALL.

I also TRIED to use the catalog spec Suzuki PN 59340-14500, EMGO PN 90-71970, EBC PN FA106. They DO NOT fit. You can use one new pad, one old pad and make them work, adding the second new pad after the first has worn down by 50 percent.

Hope these help.
-WD
Back to top
 
« Last Edit: 05/14/14 at 11:52:05 by verslagen1 »  

On 2 wheels since 7/87

Black and Chrome 2003 1950s style custom
  IP Logged
Savage_Greg
Serious Thumper
Alliance Member
*****
Offline

Don't go around your
ass to reach your
elbow...

Posts: 7844
SW Washington State
Gender: male
Re: Parts interchange...
Reply #1 - 07/07/05 at 05:51:20
 
WD wrote on 12/31/69 at 16:00:07:
Since this IS technical...

OIL FILTER, Suzuki PN 16510-37440, Emgo PN 10-85900.
Fits: DR500 X/SX/SZ/D 81-83; DR600 S/R 85-88; DR650N 89-92; DR700S 88-94; LS650/S40 86-up; SP500 81-83; SP600 85.

Says right on the filter box: For the best engine protection we recommend that you replace your oil filter when you change your oil. DO NOT exceed 1500 miles without checking AND changing this filter.

REAR BRAKE SHOES, Suzuki PN 64410-11300/11301, Emgo PN 92-41005, EBC PN 606. Fits: GS425N/EN 78-80; GSX400LX/SX 81; GN400 80-82; GS450E/L 80-83; GR650D/XD 83; GS450G 82-85; GS450LF 85; GS550LD/LF 83-85; GT250EN-EX 78-81; GS250,GSX250ET-EZ 79-82; GS450ST/SX 80-81; GS450TX/TXZ/TXD, GS400ET-EZ 81-83; GS300 82,83,85; LS650/S40 ALL.

I also TRIED to use the catalog spec Suzuki PN 59340-14500, EMGO PN 90-71970, EBC PN FA106. They DO NOT fit. You can use one new pad, one old pad and make them work, adding the second new pad after the first has worn down by 50 percent.

Hope these help.
-WD


Good info...

Why don't the EBC 106X pads fit your bike?  Did you completely collapse the caliper before you installed them?  They are the ones that I installed on our bikes....I have the picture of the brake package.
Back to top
 
 


  IP Logged
WD
Serious Thumper
2005 No Login
*****
Offline

Professional
"scooter
trash".

Posts: 5207
Rosemark TN
Gender: male
Re: Parts interchange...
Reply #2 - 07/07/05 at 06:57:43
 
Not sure why they didn't fit, but they didn't. Too thick for the most part. My guess is the shop mislabeled them... ???
-WD
Back to top
 
 

On 2 wheels since 7/87

Black and Chrome 2003 1950s style custom
  IP Logged
Savage_Greg
Serious Thumper
Alliance Member
*****
Offline

Don't go around your
ass to reach your
elbow...

Posts: 7844
SW Washington State
Gender: male
Re: Parts interchange...
Reply #3 - 07/08/05 at 06:03:42
 
It is always necessary to compress the caliper piston for new pads.  Sometimes, even before you can get it off of the rotor.  I use a C-clamp.

Here's the front brake pads.

Back to top
 
 


  IP Logged
WD
Serious Thumper
2005 No Login
*****
Offline

Professional
"scooter
trash".

Posts: 5207
Rosemark TN
Gender: male
Re: Parts interchange...
Reply #4 - 07/08/05 at 07:43:34
 
At full piston retraction, the pads are too thick. The EBC and Suzuki versions most likely fit perfectly. I picked up the Emgo set, which was all I had at the shop. The Emgo front brake pads are too thick.
-WD
Back to top
 
 

On 2 wheels since 7/87

Black and Chrome 2003 1950s style custom
  IP Logged
Savage_Rob
Serious Thumper
Alliance Member
*****
Offline

Mechanically
Inclined Amateur

Posts: 6972
Texas (Dallas area)
Gender: male
Re: Parts interchange...
Reply #5 - 06/04/06 at 09:17:57
 
Good general info for anyone buying some without disconnecting the original.

azjay wrote on 12/31/69 at 16:00:06:
fuel line is 5/16", vacuum is 3/16"

Back to top
 
 

1998|MAC muffler|ceramic coated header|K&N air filter|Amal Mk2 carb|Odyssey battery|iridium plug|NC windshield|Dunlop 491s|Superbrace|EBC brake rotor|12.5" Progressive shocks|Kuryakyn ISO grips
Savage_Rob RidingTX   IP Logged
Savage_Rob
Serious Thumper
Alliance Member
*****
Offline

Mechanically
Inclined Amateur

Posts: 6972
Texas (Dallas area)
Gender: male
Re: Parts interchange...
Reply #6 - 06/16/07 at 07:02:32
 
From Crusher0964:

Quote:
If you want to crossreference to see what parts off other bikes will fit yours here ya go:

Well duh... I tried to post here but too much info.

http://www.chopperfix.com/forums/viewtopic.php?t=218


Back to top
 
 

1998|MAC muffler|ceramic coated header|K&N air filter|Amal Mk2 carb|Odyssey battery|iridium plug|NC windshield|Dunlop 491s|Superbrace|EBC brake rotor|12.5" Progressive shocks|Kuryakyn ISO grips
Savage_Rob RidingTX   IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28890
L.A. California
Gender: male
Re: Aftermarket oil filters and brake pads
Reply #7 - 08/15/12 at 18:16:27
 
Listed for reference only, not recommended to use.

TROX wrote on 08/15/12 at 17:49:35:
It was Model# PH6017A, but if FRAM is crap,



Recommended
Quote:
HiFlo Oil Filter HF137
Back to top
 
 
WWW   IP Logged
2011BOULEVARD
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 3

Re: Parts interchange...
Reply #8 - 03/11/14 at 19:18:18
 
Savage_Greg wrote on 07/07/05 at 05:51:20:
WD wrote on 12/31/69 at 16:00:07:
Since this IS technical...

OIL FILTER, Suzuki PN 16510-37440, Emgo PN 10-85900.
Fits: DR500 X/SX/SZ/D 81-83; DR600 S/R 85-88; DR650N 89-92; DR700S 88-94; LS650/S40 86-up; SP500 81-83; SP600 85.

Says right on the filter box: For the best engine protection we recommend that you replace your oil filter when you change your oil. DO NOT exceed 1500 miles without checking AND changing this filter.

REAR BRAKE SHOES, Suzuki PN 64410-11300/11301, Emgo PN 92-41005, EBC PN 606. Fits: GS425N/EN 78-80; GSX400LX/SX 81; GN400 80-82; GS450E/L 80-83; GR650D/XD 83; GS450G 82-85; GS450LF 85; GS550LD/LF 83-85; GT250EN-EX 78-81; GS250,GSX250ET-EZ 79-82; GS450ST/SX 80-81; GS450TX/TXZ/TXD, GS400ET-EZ 81-83; GS300 82,83,85; LS650/S40 ALL.

I also TRIED to use the catalog spec Suzuki PN 59340-14500, EMGO PN 90-71970, EBC PN FA106. They DO NOT fit. You can use one new pad, one old pad and make them work, adding the second new pad after the first has worn down by 50 percent.

Hope these help.
-WD


Good info...

Why don't the EBC 106X pads fit your bike?  Did you completely collapse the caliper before you installed them?  They are the ones that I installed on our bikes....I have the picture of the brake package.


I also had a hard time getting them to fit. I had to grind off just a hair on each pad and then they fit like a glove
Back to top
 
 

2011 Suzuki S40
luggage rack and sissy bar
  IP Logged
WD
Serious Thumper
2005 No Login
*****
Offline

Professional
"scooter
trash".

Posts: 5207
Rosemark TN
Gender: male
Re: Aftermarket oil filters and brake pads
Reply #9 - 04/10/14 at 08:38:21
 
Talk about bringing a thread back from the graveyard...  Grin

That brake pad is available in 3 different thicknesses. You need the thinnest one for it to fit correctly unless your rotor is way out of spec.
Back to top
 
 

On 2 wheels since 7/87

Black and Chrome 2003 1950s style custom
  IP Logged
lnewlf
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 13

Felpro exhaust header gasket $5.00
Reply #10 - 05/14/14 at 05:32:38
 
Hey guys I did some research and tracked down a header gasket from autozone. It is a Felpro # 60720. No excuses for head pipe leaks now.
Back to top
 
 
  IP Logged
wickedbiker
Full Member
***
Offline

Riding a Wicked
Savage Custom

Posts: 145
Tampa Bay, FL.
Gender: male
Re: Aftermarket Parts interchange...
Reply #11 - 05/17/14 at 19:34:27
 
Actually there's one specifically designed for our bikes and cheaper if you search
"LS650 header gasket" on eBay
http://www.ebay.com/itm/Suzuki-LS650-86-06-Exhaust-Header-Ring-Gasket-Seal-/1...

The ones you have there are for cat converters, but hey if it works why not
Back to top
 
 
WWW   IP Logged
ratz
Junior Member
**
Offline

Wait.......what??

Posts: 92
Alabama Gulf Coast
Gender: male
Cam chain crossover
Reply #12 - 05/09/12 at 14:23:25
 
This may have been posted before,but the cam chain for the 1990-2005 Kawasaki ZX600 is the same chain,but about 20 to 40 dollars less,depending on where you look.
The manufacturer number is 82RH2015-132 link.
The Kawasaki part number is 92057-1297.
Hope this helps someone.
Back to top
 
 
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28890
L.A. California
Gender: male
Re: Cam chain alternates
Reply #13 - 08/07/12 at 07:49:57
 
Bikerphil wrote on 08/07/12 at 07:03:17:
I found that the Kawasaki ZX600 D and E versions (not the C or A) use the same chain and the ZZR500 and all Aprillia 650s, unfortunately, these bikes are as rare as hen's teeth in Brazil so parts would be very expensive.


Not confirmed, but worth looking into.
Back to top
 
 
WWW   IP Logged
Rodger
Senior Member
****
Offline

SuzukiSavage.com
Rocks!

Posts: 256

Re: Aftermarket Parts interchange...
Reply #14 - 11/23/16 at 07:49:52
 
Another oil filter:

KN-137, available from O'Reilly Auto Parts. If not in stock, they can usually get one in overnight. About $10.

KN-137 also available from Amazon as an "add-on" item (you have to order $25 or more). Price: $5.17 each.

Prices as of 30 Oct 2016, filter only, no O-rings.
Back to top
 
 
  IP Logged
Pages: 1 2 
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
10/05/24 at 12:37:24



General CategoryTechnical Documents/Reference › Aftermarket Parts interchange...


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.