SuzukiSavage.com - Aftermarket Parts interchange...

WD

Serious Thumper
2005 No Login

Offline

Professional
"scooter
trash".

Posts: 5207
Rosemark TN
Gender: male

Aftermarket Parts interchange...
07/06/05 at 19:30:28

Since this IS technical...

OIL FILTER, Suzuki PN 16510-37440, Emgo PN 10-85900.
Fits: DR500 X/SX/SZ/D 81-83; DR600 S/R 85-88; DR650N 89-92; DR700S 88-94; LS650/S40 86-up; SP500 81-83; SP600 85.

Says right on the filter box: For the best engine protection we recommend that you replace your oil filter when you change your oil. DO NOT exceed 1500 miles without checking AND changing this filter.

REAR BRAKE SHOES, Suzuki PN 64410-11300/11301, Emgo PN 92-41005, EBC PN 606. Fits: GS425N/EN 78-80; GSX400LX/SX 81; GN400 80-82; GS450E/L 80-83; GR650D/XD 83; GS450G 82-85; GS450LF 85; GS550LD/LF 83-85; GT250EN-EX 78-81; GS250,GSX250ET-EZ 79-82; GS450ST/SX 80-81; GS450TX/TXZ/TXD, GS400ET-EZ 81-83; GS300 82,83,85; LS650/S40 ALL.

I also TRIED to use the catalog spec Suzuki PN 59340-14500, EMGO PN 90-71970, EBC PN FA106. They DO NOT fit. You can use one new pad, one old pad and make them work, adding the second new pad after the first has worn down by 50 percent.

Hope these help.
-WD

Back to top

« Last Edit: 05/14/14 at 11:52:05 by verslagen1 »

On 2 wheels since 7/87

Black and Chrome 2003 1950s style custom

IP Logged

Savage_Greg

Serious Thumper
Alliance Member

Offline

Don't go around your
ass to reach your
elbow...

Posts: 7844
SW Washington State
Gender: male

Re: Parts interchange...
Reply #1 - 07/07/05 at 05:51:20

WD wrote on 12/31/69 at 16:00:07:

Since this IS technical...

OIL FILTER, Suzuki PN 16510-37440, Emgo PN 10-85900.
Fits: DR500 X/SX/SZ/D 81-83; DR600 S/R 85-88; DR650N 89-92; DR700S 88-94; LS650/S40 86-up; SP500 81-83; SP600 85.

Says right on the filter box: For the best engine protection we recommend that you replace your oil filter when you change your oil. DO NOT exceed 1500 miles without checking AND changing this filter.

REAR BRAKE SHOES, Suzuki PN 64410-11300/11301, Emgo PN 92-41005, EBC PN 606. Fits: GS425N/EN 78-80; GSX400LX/SX 81; GN400 80-82; GS450E/L 80-83; GR650D/XD 83; GS450G 82-85; GS450LF 85; GS550LD/LF 83-85; GT250EN-EX 78-81; GS250,GSX250ET-EZ 79-82; GS450ST/SX 80-81; GS450TX/TXZ/TXD, GS400ET-EZ 81-83; GS300 82,83,85; LS650/S40 ALL.

I also TRIED to use the catalog spec Suzuki PN 59340-14500, EMGO PN 90-71970, EBC PN FA106. They DO NOT fit. You can use one new pad, one old pad and make them work, adding the second new pad after the first has worn down by 50 percent.

Hope these help.
-WD

Good info...

Why don't the EBC 106X pads fit your bike? Did you completely collapse the caliper before you installed them? They are the ones that I installed on our bikes....I have the picture of the brake package.

Back to top

IP Logged

WD Serious Thumper 2005 No Login Offline Professional "scooter trash". Posts: 5207 Rosemark TN Gender:	Re: Parts interchange... Reply #2 - 07/07/05 at 06:57:43 Not sure why they didn't fit, but they didn't. Too thick for the most part. My guess is the shop mislabeled them... ??? -WD
Back to top	On 2 wheels since 7/87 Black and Chrome 2003 1950s style custom IP Logged

Savage_Greg Serious Thumper Alliance Member Offline Don't go around your ass to reach your elbow... Posts: 7844 SW Washington State Gender:	Re: Parts interchange... Reply #3 - 07/08/05 at 06:03:42 It is always necessary to compress the caliper piston for new pads. Sometimes, even before you can get it off of the rotor. I use a C-clamp. Here's the front brake pads.
Back to top	IP Logged

WD Serious Thumper 2005 No Login Offline Professional "scooter trash". Posts: 5207 Rosemark TN Gender:	Re: Parts interchange... Reply #4 - 07/08/05 at 07:43:34 At full piston retraction, the pads are too thick. The EBC and Suzuki versions most likely fit perfectly. I picked up the Emgo set, which was all I had at the shop. The Emgo front brake pads are too thick. -WD
Back to top	On 2 wheels since 7/87 Black and Chrome 2003 1950s style custom IP Logged

Savage_Rob Serious Thumper Alliance Member Offline Mechanically Inclined Amateur Posts: 6972 Texas (Dallas area) Gender:	Re: Parts interchange... Reply #5 - 06/04/06 at 09:17:57 Good general info for anyone buying some without disconnecting the original. azjay wrote on 12/31/69 at 16:00:06: fuel line is 5/16", vacuum is 3/16"
Back to top	1998\|MAC muffler\|ceramic coated header\|K&N air filter\|Amal Mk2 carb\|Odyssey battery\|iridium plug\|NC windshield\|Dunlop 491s\|Superbrace\|EBC brake rotor\|12.5" Progressive shocks\|Kuryakyn ISO grips IP Logged

Savage_Rob Serious Thumper Alliance Member Offline Mechanically Inclined Amateur Posts: 6972 Texas (Dallas area) Gender:	Re: Parts interchange... Reply #6 - 06/16/07 at 07:02:32 From Crusher0964: Quote: If you want to crossreference to see what parts off other bikes will fit yours here ya go: Well duh... I tried to post here but too much info. http://www.chopperfix.com/forums/viewtopic.php?t=218
Back to top	1998\|MAC muffler\|ceramic coated header\|K&N air filter\|Amal Mk2 carb\|Odyssey battery\|iridium plug\|NC windshield\|Dunlop 491s\|Superbrace\|EBC brake rotor\|12.5" Progressive shocks\|Kuryakyn ISO grips IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28890 L.A. California Gender:	Re: Aftermarket oil filters and brake pads Reply #7 - 08/15/12 at 18:16:27 Listed for reference only, not recommended to use. TROX wrote on 08/15/12 at 17:49:35: It was Model# PH6017A, but if FRAM is crap, Recommended Quote: HiFlo Oil Filter HF137
Back to top	Versey's Place Tech Section Index IP Logged

2011BOULEVARD

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 3

Re: Parts interchange...
Reply #8 - 03/11/14 at 19:18:18

Savage_Greg wrote on 07/07/05 at 05:51:20:

WD wrote on 12/31/69 at 16:00:07:

Since this IS technical...

OIL FILTER, Suzuki PN 16510-37440, Emgo PN 10-85900.
Fits: DR500 X/SX/SZ/D 81-83; DR600 S/R 85-88; DR650N 89-92; DR700S 88-94; LS650/S40 86-up; SP500 81-83; SP600 85.

Says right on the filter box: For the best engine protection we recommend that you replace your oil filter when you change your oil. DO NOT exceed 1500 miles without checking AND changing this filter.

REAR BRAKE SHOES, Suzuki PN 64410-11300/11301, Emgo PN 92-41005, EBC PN 606. Fits: GS425N/EN 78-80; GSX400LX/SX 81; GN400 80-82; GS450E/L 80-83; GR650D/XD 83; GS450G 82-85; GS450LF 85; GS550LD/LF 83-85; GT250EN-EX 78-81; GS250,GSX250ET-EZ 79-82; GS450ST/SX 80-81; GS450TX/TXZ/TXD, GS400ET-EZ 81-83; GS300 82,83,85; LS650/S40 ALL.

I also TRIED to use the catalog spec Suzuki PN 59340-14500, EMGO PN 90-71970, EBC PN FA106. They DO NOT fit. You can use one new pad, one old pad and make them work, adding the second new pad after the first has worn down by 50 percent.

Hope these help.
-WD

Good info...

Why don't the EBC 106X pads fit your bike? Did you completely collapse the caliper before you installed them? They are the ones that I installed on our bikes....I have the picture of the brake package.

I also had a hard time getting them to fit. I had to grind off just a hair on each pad and then they fit like a glove

Back to top

2011 Suzuki S40
luggage rack and sissy bar

IP Logged

WD Serious Thumper 2005 No Login Offline Professional "scooter trash". Posts: 5207 Rosemark TN Gender:	Re: Aftermarket oil filters and brake pads Reply #9 - 04/10/14 at 08:38:21 Talk about bringing a thread back from the graveyard... That brake pad is available in 3 different thicknesses. You need the thinnest one for it to fit correctly unless your rotor is way out of spec.
Back to top	On 2 wheels since 7/87 Black and Chrome 2003 1950s style custom IP Logged

lnewlf YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 13	Felpro exhaust header gasket $5.00 Reply #10 - 05/14/14 at 05:32:38 Hey guys I did some research and tracked down a header gasket from autozone. It is a Felpro # 60720. No excuses for head pipe leaks now.
Back to top	IP Logged

wickedbiker Full Member Offline Riding a Wicked Savage Custom Posts: 145 Tampa Bay, FL. Gender:	Re: Aftermarket Parts interchange... Reply #11 - 05/17/14 at 19:34:27 Actually there's one specifically designed for our bikes and cheaper if you search "LS650 header gasket" on eBay http://www.ebay.com/itm/Suzuki-LS650-86-06-Exhaust-Header-Ring-Gasket-Seal-/1... The ones you have there are for cat converters, but hey if it works why not
Back to top	IP Logged

ratz Junior Member Offline Wait.......what?? Posts: 92 Alabama Gulf Coast Gender:	Cam chain crossover Reply #12 - 05/09/12 at 14:23:25 This may have been posted before,but the cam chain for the 1990-2005 Kawasaki ZX600 is the same chain,but about 20 to 40 dollars less,depending on where you look. The manufacturer number is 82RH2015-132 link. The Kawasaki part number is 92057-1297. Hope this helps someone.
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28890 L.A. California Gender:	Re: Cam chain alternates Reply #13 - 08/07/12 at 07:49:57 Bikerphil wrote on 08/07/12 at 07:03:17: I found that the Kawasaki ZX600 D and E versions (not the C or A) use the same chain and the ZZR500 and all Aprillia 650s, unfortunately, these bikes are as rare as hen's teeth in Brazil so parts would be very expensive. Not confirmed, but worth looking into.
Back to top	Versey's Place Tech Section Index IP Logged

Rodger Senior Member Offline SuzukiSavage.com Rocks! Posts: 256	Re: Aftermarket Parts interchange... Reply #14 - 11/23/16 at 07:49:52 Another oil filter: KN-137, available from O'Reilly Auto Parts. If not in stock, they can usually get one in overnight. About $10. KN-137 also available from Amazon as an "add-on" item (you have to order $25 or more). Price: $5.17 each. Prices as of 30 Oct 2016, filter only, no O-rings.
Back to top	IP Logged