SuzukiSavage.com - Ignitor Connector

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Technical Documents/Reference › Ignitor Connector

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Ignitor Connector (Read 312 times)

Kropatchek Serious Thumper Offline Why more than 1 cylinder? Posts: 1457 Alphen a/d Rijn Netherlands Gender:	Ignitor Connector 05/18/05 at 08:12:53 Message sent 12-3-12 As from page 5-7 of the Suzuki Savage WSM. Greetz Kropatchek
Back to top	TCI_pin_out_001.jpg « Last Edit: 07/26/22 at 08:01:10 by verslagen1 » Never ask your bike to scream before her throat is warm. '93 Sav in '96 ( yellow) looks IP Logged

Bobbert Serious Thumper Offline CHOP IT Posts: 836 Los Angeles, CA Gender:	Re: Ignitor Connector Reply #1 - 01/07/10 at 14:19:25 why does this connect to the starter relay? Edit: Answer- The CDI changes timing when the engine is first starting.
Back to top	TCI_wiring_001.jpg « Last Edit: 07/26/22 at 08:02:16 by verslagen1 » In progress- 1996 Savage: solo seat, pod filter, open exhaust, and custom bars, fender, wiring, paint. IP Logged

Digger Serious Thumper 2005 No Login Offline Ya gotta be tough to ride singles! Posts: 1604 Colorado Springs, CO Gender:	Re: Ignitor Connector Reply #2 - 01/10/10 at 19:51:02 Bobbert wrote on 01/07/10 at 14:19:25: why does this connect to the starter relay? Edit: Answer- The CDI changes timing when the engine is first starting.
Back to top	Digger 2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles I don't own a cage. www.astronautbiker.com IP Logged

splash07 Serious Thumper Offline Posts: 911 Charleston, SC Gender:	Re: Ignitor Connector Reply #3 - 05/16/12 at 09:09:15 if anyone needs a new connector altogether (like I did), here is where I found it. 8 Position .090 Waterproof Connector Female Half. http://www.easternbeaver.com/Main/Elec__Products/Connectors/Sealed/FKWH/fkwh.... Edited: new link: http://www.easternbeaver.com/Main/Elec__Products/Connectors/Sealed/RFW/rfw.ht...
Back to top	« Last Edit: 03/18/21 at 08:47:47 by verslagen1 » IP Logged

shrekdemon

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 2

Re: Ignitor Connector
Reply #4 - 06/13/12 at 14:02:12

hey splash,
i swaped out the engine from a 1986 to a 2006, everything is the same except the wiring plug for the cdi, wich i also bought for a 2006). when i went on the website you posted they want to charge you like 600 bucks for delivery, what going on with that?
also, the service manual deos not show you the wiring configuration on to the plug. i would really like to know where each wire geos. there are 6 wires and 8 pins on the connector.

thanks a lot

IP Logged

splash07

Serious Thumper

Offline

Posts: 911
Charleston, SC
Gender: male

Re: Ignitor Connector
Reply #5 - 06/14/12 at 06:47:30

So this guy is located in Japan so you have to spend at least 20 bucks or he charges an outrageous amount in shipping, once you have over 20 in your cart the shipping goes down and is actually pretty reasonable for international orders. As for the wire placement I cant help out much there, It was trial and error the first time I did it on mine. I vaguely remember seeing a thread in here somewhere with that info but I would have to search a bit to find it.

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home