Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1 2 
Send Topic Print
Baffle Removal (Read 180 times)
lordzamize
Ex Member




Baffle Removal
05/27/04 at 13:56:38
 
I have a 1997 Savage, and I want it to be louder.  I was wondering if I can remove the baffle with out working about the back pressure.

Can I drill out the rivits holding the baffle in place?  Do I have to adjust the carb or anything after doing that?

Z
Back to top
 
 
  IP Logged
lordzamize
Ex Member




Re: Baffle Removal
Reply #1 - 06/01/04 at 07:38:29
 
Soooo, I guess no one has ever done this?  Or have you?  Just looking for some guidance.

Z
Back to top
 
 
  IP Logged
Gitarzan
Serious Thumper
2004 No Login
*****
Offline

!

Posts: 827
Columbus, Oh, Earth, Solar Sys
Gender: male
Re: Baffle Removal
Reply #2 - 06/01/04 at 15:34:59
 
Check out this site: http://www.jonline.org/savage/Tips___How-to_s/tips___how-to_s.html

He's done quite a bit mufflerwise and covers drilling stock mufflers.
Back to top
 
 

2001 Cherry Red and Ivory Yamaha VStar 1100

  IP Logged
LondonThing-co-uk
Ex Member




Re: Baffle Removal
Reply #3 - 06/01/04 at 16:19:56
 
Had a listen to that.... Anyone know what it sounds like with only the down pipe alone, and no can at all? (for Americans i mean muffler, lol)

ChrisF..
Back to top
 
 
  IP Logged
Gitarzan
Serious Thumper
2004 No Login
*****
Offline

!

Posts: 827
Columbus, Oh, Earth, Solar Sys
Gender: male
Re: Baffle Removal
Reply #4 - 06/01/04 at 17:35:15
 
Yes I do.  When I put on the Harley muffler on mine, do you think for minute that I didn't start it up to see what it sounded like "raw"?

  • 1. It's loud.

  • 2. It's loud.

  • 3. Higher pitched, more of a "brappp, brappp, brappp," sound, but louder.

  • 4. It's loud.
Back to top
 
 

2001 Cherry Red and Ivory Yamaha VStar 1100

  IP Logged
LondonThing-co-uk
Ex Member




Re: Baffle Removal
Reply #5 - 06/01/04 at 17:40:21
 
LOL, i would have done the same, but cant cos myne hasnt run in over 10 years, and iv been trying to get the thing together for the last 6 months! But then i did decide to Drastically mod and chop myne, befor i even got it running as a standard bike, Doh! And i havent got a muffler at all, just the down pipe, if it sounded reasonable, i was just going to put a turn out on the end...??? What does it sound like with the Harley muffler?
Back to top
 
 
  IP Logged
Paul
Guest




Re: Baffle Removal
Reply #6 - 06/01/04 at 18:36:37
 
I have a harley muffler and it sounds great. I think it's pretty loud. I was told if i want to make it louder use a heat gun too hollow out the baffle.
I get alot of comments on how good it sounds.
Back to top
 
 
  IP Logged
Gitarzan
Serious Thumper
2004 No Login
*****
Offline

!

Posts: 827
Columbus, Oh, Earth, Solar Sys
Gender: male
Re: Baffle Removal
Reply #7 - 06/02/04 at 20:34:10
 
Paul wrote on 12/31/69 at 16:00:06:
I have a harley muffler and it sounds great. I think it's pretty loud. I was told if i want to make it louder use a heat gun too hollow out the baffle.
I get alot of comments on how good it sounds.


Concur.

It's quiet, but lower pitched than the stock muffler.  It has a lot better low pitched resonance.  Kind of a nice thumpa thumpa thumpa sound.

And it's a good bit lighter in weight. At least 1/3 lighter, maybe half.

I had an extension pipe made for mine:

There is a chrome heat shield covering the Zinc pipe now.

I'm considering painting the zinc pipe with high heat black (or maybe orange) paint -the kind they paint manifolds with- and getting one of these over it:

http://www.jpcycles.com/productgroup.aspx?GID=91ff6c5a-77d9-4448-8d6d-2d1df00...

Back to top
 
 

2001 Cherry Red and Ivory Yamaha VStar 1100

  IP Logged
lordzamize
Ex Member




Re: Baffle Removal
Reply #8 - 06/03/04 at 16:42:27
 
Can I change out the stock with a Harley muffler without having to rejet, worry about back pressure, ect?
Back to top
 
 
  IP Logged
lordzamize
Ex Member




Re: Baffle Removal
Reply #9 - 06/10/04 at 04:48:40
 
Here is what I did...

Rather then removing the baffle all together, or putting a HD muffler on, I just drilled two holes through the baffle plate, 5/16" wide.  I didn't use the foot long bit as suggested before.

It sounds great and does not seem to have any performance changes!

Grin
Back to top
 
 
  IP Logged
Gitarzan
Serious Thumper
2004 No Login
*****
Offline

!

Posts: 827
Columbus, Oh, Earth, Solar Sys
Gender: male
Re: Baffle Removal
Reply #10 - 07/02/04 at 21:53:05
 
Gitarzan wrote on 12/31/69 at 16:00:06:
Yes I do.  When I put on the Harley muffler on mine, do you think for minute that I didn't start it up to see what it sounded like "raw"?
  • 1. It's loud.
  • 2. It's loud.
  • 3. Higher pitched, more of a "brappp, brappp, brappp," sound, but louder.
  • 4. It's loud.


  • Funny, after riding around on it for a month it no longer seems to be very loud.  I wonder if I went deaf?  ???
    Back to top
     
     

    2001 Cherry Red and Ivory Yamaha VStar 1100

      IP Logged
    Savage_Greg
    Serious Thumper
    Alliance Member
    *****
    Offline

    Don't go around your
    ass to reach your
    elbow...

    Posts: 7844
    SW Washington State
    Gender: male
    Re: Baffle Removal
    Reply #11 - 07/03/04 at 04:02:02
     
    I forget who's picture I was looking at, but someone has a blue header pipe on their Savage...well, actually quite a few people do.  So...

    ...if you ask about the effect of removing baffles, drilling baffles, or completely removing the muffler on a stock late model Savage, all you need to do is think "blue".  Bluing is not normal, especially when we are talking about a double walled exhaust header.  Bluing is the result of running the engine hotter by leaning the fuel mixture or lowering back pressure.  That is the effect, and if you don't want "blue", then you better think "jets" too.

    There can also be more serious impact from completely removing the muffler than simple hearing loss (a condition that I truely have).  You also run the risk of burning the exhaust valves.

    BTW - with the mention of Jon D's site.  Yes, he drilled out his exhaust, but now he has a SuperTrapp or Jardine installed.  So maybe there IS a better way after all....
    Back to top
     
     


      IP Logged
    TheBabyDerp
    Full Member
    ***
    Offline

    Love to ride and
    travel.

    Posts: 104
    Mobile, Alabama
    Gender: male
    Re: Baffle Removal
    Reply #12 - 09/26/24 at 09:45:37
     
    Well I am 20 years late. I was 4 at the time of this post, but I recently de-baffled mine with a circular saw drill bit. I forgot the size, I think it was about 1.75 to 2 inches. Worked perfectly. I honestly like the sound, but it does need to be rejetted. Backfires bad running super lean. It doesn't help that I am at sea level down here in Mobile. Once I rejet the bike, I may upload a video and post it.
    Back to top
     
     
      IP Logged
    JOG
    Serious Thumper
    *****
    Offline

    SuzukiSavage.com
    Rocks!

    Posts: 969
    Longview, Texas
    Gender: male
    Re: Baffle Removal
    Reply #13 - 09/26/24 at 10:10:51
     
    Step one
    Get running
    Step two
    Tune it, get it running Right.
    Step three
    Make mods.

    If ya make mods before it's running Right ya can't know if it's needing jetted or what.
    Back to top
     
     
      IP Logged
    TheBabyDerp
    Full Member
    ***
    Offline

    Love to ride and
    travel.

    Posts: 104
    Mobile, Alabama
    Gender: male
    Re: Baffle Removal
    Reply #14 - 09/27/24 at 09:13:32
     
    I've never done an exhaust after tuning a vehicle. I've always tuned after the fact. The bike was going to need a rejet anyway given how lean they come from factory. I got a stage 1 kit from sixsigma. Currently restoring a boat so unfortunately the Suzuki is a secondary affair.

    Back to top
     
     
      IP Logged
    Pages: 1 2 
    Send Topic Print


    « Home

     
    « Home
    SuzukiSavage.com
    11/04/24 at 03:50:50



    General CategoryRubber Side Down! › Baffle Removal


    SuzukiSavage.com » Powered by YaBB 2.2!
    YaBB © 2000-2007. All Rights Reserved.