Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
Ignitor Connector (Read 300 times)
Kropatchek
Serious Thumper
*****
Offline

Why more than 1
cylinder?

Posts: 1457
Alphen a/d Rijn  Netherlands
Gender: male
Ignitor Connector
05/18/05 at 08:12:53
 
Message sent 12-3-12

As from page 5-7 of the Suzuki Savage WSM.




Greetz
Kropatchek Grin
Back to top
 
« Last Edit: 12/03/12 at 05:05:03 by Oldfeller »  

Never ask your bike to scream before her throat is warm.
'93 Sav in '96 ( yellow) looks
  IP Logged
Bobbert
Serious Thumper
*****
Offline

CHOP IT

Posts: 836
Los Angeles, CA
Gender: male
Re: Ignitor Connector
Reply #1 - 01/07/10 at 14:19:25
 
why does this connect to the starter relay?

Edit:

Answer- The CDI changes timing when the engine is first starting.
Back to top
 
« Last Edit: 01/07/10 at 17:36:21 by Bobbert »  

In progress- 1996 Savage: solo seat, pod filter, open exhaust, and custom bars, fender, wiring, paint.
  IP Logged
Digger
Serious Thumper
2005 No Login
*****
Offline

Ya gotta be tough to
ride singles!

Posts: 1604
Colorado Springs, CO
Gender: male
Re: Ignitor Connector
Reply #2 - 01/10/10 at 19:51:02
 
Bobbert wrote on 01/07/10 at 14:19:25:
why does this connect to the starter relay?

Edit:

Answer- The CDI changes timing when the engine is first starting.


Smiley
Back to top
 
 

Digger
2001, Metallic Glacial Blue, Raptor Petcock, Verslavy (first hole) (otherwise, mechanically, the bike is stock), 13,xxx miles
I don't own a cage.
www.astronautbiker.com
WWW   IP Logged
splash07
Serious Thumper
*****
Offline



Posts: 886
Charleston, SC
Gender: male
Re: Ignitor Connector
Reply #3 - 05/16/12 at 09:09:15
 
if anyone needs a new connector altogether (like I did), here is where I found it.

8 Position .090 Waterproof Connector Female Half.

http://www.easternbeaver.com/Main/Elec__Products/Connectors/Sealed/FKWH/fkwh....
Back to top
 
 

  IP Logged
shrekdemon
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 2

Re: Ignitor Connector
Reply #4 - 06/13/12 at 14:02:12
 
hey splash,
 i swaped out the engine from a 1986 to a 2006, everything is the same except the wiring plug for the cdi, wich i also bought for a 2006). when i went on the website you posted they want to charge you like 600 bucks for delivery, what going on with that?
also, the service manual deos not show you the wiring configuration on to the plug. i would really like to know where each wire geos. there are 6 wires and 8 pins on the connector.

thanks a lot
Back to top
 
 
  IP Logged
splash07
Serious Thumper
*****
Offline



Posts: 886
Charleston, SC
Gender: male
Re: Ignitor Connector
Reply #5 - 06/14/12 at 06:47:30
 
So this guy is located in Japan so you have to spend at least 20 bucks or he charges an outrageous amount in shipping, once you have over 20 in your cart the shipping goes down and is actually pretty reasonable for international orders. As for the wire placement I cant help out much there, It was trial and error the first time I did it on mine. I vaguely remember seeing a thread in here somewhere with that info but I would have to search a bit to find it.
Back to top
 
 

  IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
12/09/18 at 20:48:16



General CategoryTechnical Documents/Reference › Ignitor Connector


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.