SuzukiSavage.com - Pin striping

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Pin striping

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Pin striping (Read 163 times)

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Pin striping Reply #15 - 02/25/19 at 20:49:38 Zook wrote on 02/25/19 at 16:56:58: Gender brace made from flat stock. Really? Maybe you should move this to the Tall Table.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Zook YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 47	Re: Pin striping Reply #16 - 02/26/19 at 05:54:04 Gender brace instead of fender brace. Interesting typo. I fixed it but it leaves me wondering what exactly a gender brace would do.
Back to top	IP Logged

SlabSlider YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 18 Macon, GA Gender:	Re: Pin striping Reply #17 - 02/26/19 at 14:06:54 Thank you for the close ups Zook! I ordered a fender from TCBros that should arrive in a few days. How do you think a single L bracket in the center front of the swingarm held in place with a self tapping screw would hold up? Is there a lot of stress on the front rear fender mount?
Back to top	IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Pin striping Reply #18 - 02/26/19 at 16:25:19 Zook wrote on 02/26/19 at 05:54:04: Gender brace instead of fender brace. Interesting typo. I fixed it but it leaves me wondering what exactly a gender brace would do. Maybe it's what people use if they are unable to afford the pill.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

batman

Serious Thumper

Offline

SuzukiSavage.com
Rocks!

Posts: 3806
osceola new york
Gender: male

Re: Pin striping
Reply #19 - 02/26/19 at 20:15:55

SlabSlider wrote on 02/26/19 at 14:06:54:

Thank you for the close ups Zook! I ordered a fender from TCBros that should arrive in a few days. How do you think a single L bracket in the center front of the swingarm held in place with a self tapping screw would hold up? Is there a lot of stress on the front rear fender mount?

I would consider bolting if the bike is a hardtail ,but if you have shocks, and that part of the swingarm moves up and down only a fraction of the amount the shocks do, sheet metal screws may work.

my old work mates called me MacGyver

IP Logged

Zook YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 47	Re: Pin striping Reply #20 - 02/27/19 at 18:58:19 There isn’t a lot of Stress on the fender mount but there is a great deal of vibration. I think two connections are always better than one and a nut and bolt are sturdier than a self taping screw. I used one of each because I didn’t have enough confidence that the self taping screw would hold all on it’s own.
Back to top	IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home