SuzukiSavage.com - Fork in the road, or at least on a savage.

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Fork in the road, or at least on a savage.

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Fork in the road, or at least on a savage. (Read 61 times)

Matchless G11 Senior Member Offline SuzukiSavage.com Rocks! Posts: 451 Newfoundland NJ	Fork in the road, or at least on a savage. 05/14/18 at 17:38:38 Fork in the road, or at least on a savage. Been having little luck on finding a savage rolling frame. basically I need a lower right fork leg. (yea I know post in the market place ) but the question I have belongs here, Does any one know what other Suzuki models (or any other of the big four) uses the same lower fork leg?
Back to top	IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 18104 Camp Springs, Kentucky Gender:	Re: Fork in the road, or at least on a savage. Reply #1 - 05/14/18 at 19:04:33 I seriously doubt if any other motorcycle uses the same lower fork leg. Ebay is loaded with fork parts.....or call Pinwall Cycles in Massilon, OH.
Back to top	Someday I will be old......But not today! IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Fork in the road, or at least on a savage. Reply #2 - 05/15/18 at 10:27:22 Is there a different front end that would fit?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18104
Camp Springs, Kentucky
Gender: male

Re: Fork in the road, or at least on a savage.
Reply #3 - 05/15/18 at 10:42:36

justin_o_guy2 wrote on 05/15/18 at 10:27:22:

Is there a different front end that would fit?

That discussion has occurred many times on this forum.

All motorcycle forks mount using a shaft and some bearings, and it is not all that tough to get something to work. But the swap gets very complicated if you don't use the front wheel, brakes, fenders, headlight, etc. that also bolt to those forks. Then you need to consider that a front end for an 600 pound bike may not really work all that well on a 350 pound bike.

Someday I will be old......But not today!

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home