SuzukiSavage.com - bolt length

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › bolt length

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

bolt length (Read 50 times)

Steddy58 Full Member Offline Ooops I did it again Posts: 240 Liverpool UK Gender:	bolt length 04/24/15 at 05:04:16 Hey all, can anyone point me in the right direction where I can find out the correct length and position of the bolts holding the clutch casing on many thanks
Back to top	1988 sav, mikuni vm36 carb (lancer),high comp piston, racing cam, raptor petcock, self-made exhaust, delkevic silencer (ryca header), K&N air filter, 48,000 miles IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 17832 Camp Springs, Kentucky Gender:	Re: bolt length Reply #1 - 04/24/15 at 05:16:13 There are 3 bolts with sealing washers, and 2 that are longer. There is a photo in this thread. http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1191167029
Back to top	Someday I will be old......But not today! IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: bolt length Reply #2 - 04/24/15 at 09:23:55 An online on cardboard, x punched where each bolt goes. Keep them straight as it comes apart, makes going together so easy.
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home