morality in business is a oximoron

http://www.e-catworld.com/2016/05/16/mat-lewan-meets-rossi-in-sweden-rossi-bi...

https://animpossibleinvention.com/2016/05/16/rossi-makes-offer-on-swedish-factor
y-building-plus-more-updates/



This is a huge move forward in explaining the whole IH mess.   Industrial Heat never intended to pay the full 89 million, they didn't even have the dollars to pay them out.  They just wanted to flip Rossi's IP for a quick buck then claim it didn't work for them, so we aren't paying Rossi the money we don't have anyway.  

This is the same thing Cherokee has done in the past to other new tech inventors, sell the hell out of the new idea, collect a lot of investment dollars, disperse the IP for some large dollars to various interested parties then disappear the money and then claim the IP turns out not to work, not our fault.   Even the overnight creation of Industrial Heat as a "readily disposable, easily bankrupted cut-out company" falls in line with Cherokee's past documented dirty dealings.  

Truly, the venture capital world is not a nice world to deal in at all .......  but Rossi went in with his eyes open and he was definitely documenting all the details as they occurred under the careful direction of his lawyers.  Some of Rossi's counter-moves were equally sharp and cutting, so you can say the game was being played by both sides.

This article also refers to Rossi buying a Swedish plant site (with Hydrofusion's help) that has lots of space to develop his ABB automated production lines.

Read, just read.    Also note that Rossi does look really really old now after his one year in the containers.    He has stopped dying his hair now and he has no tan for much of anything at all, but he still looks plenty mentally sharp.

http://www.e-catworld.com/2016/05/29/rossi-1-week-e-cat-quarkx-test-to-start-...

Tomorrow Rossi starts a one week long test of the E-Cat Quark for his new consortium of investors in Sweden.  

More information will be announced after a confirmed completion of this one week long private demonstration.

Rossi has said in the recent past that he would do some form of a public demo soon if the private demo correctly resulted in new funding with which to build his new robotic assembly line factory.

Justin will like this one ..... they caught out "Frank" as the joint screen name of an APCO disinformation team.  

Did "him" up roasted a golden brown, they did.    

This makes Fred Zoepfl, Mary Yugo, Kivret, Jeb and Frank as known APCO/I.H. disinformation mouthpieces.

http://www.sifferkoll.se/sifferkoll/and-now-lets-have-a-closer-look-at-a-real...

http://www.e-catworld.com/2016/06/02/leonardo-corporation-issues-press-releas...


INDUSTRIAL HEAT LOSES LICENSE FOR ROSSI’S “E-CAT”

Leonardo Corporation announced today, June 2, 2016, that it has terminated the license granted to Industrial Heat, LLC. for the Energy Catalyzer (“E-Cat”) technology. Effective immediately, Leonardo Corporation has the sole and exclusive right to the E- Cat intellectual property in all territories previously licensed to Industrial Heat, LLC. According to Leonardo Corporation, the decision to terminate Industrial Heat, LLC.’s license follows Industrial Heat, LLC.’s failure to pay the agreed upon licensing fee.

The license previously granted to Industrial Heat, LLC gave the company the exclusive rights to use the E-Cat intellectual property in the geographic territories of North America, Central America, South America, the Caribbean, China, Russia, Saudi Arabia and the Arabian Emirates.

In an effort to avoid any delay in making the E-Cat units commercially available in the above territories, Leonardo Corporation will be working diligently with its strategic partners to develop a new manufacturing and distribution strategy for those territories. For those customers located in these territories, all future inquiries regarding the E-Cat should be directed to Leonardo Corporation directly through its website.

As a result of its terminating Industrial Heat, LLC’s license, Leonardo Corporation has also demanded that Industrial Heat, LLC immediately assign all patents and patent applications based upon the E-Cat intellectual property to Leonardo Corporation, or abandon these applications in all jurisdictions.

Additional information is available at www.ecat.com.

Contact: Leonardo’s attorney John Annesser, Esq. JWA@silverlawgroup.com
SOURCE: Leonardo Corporation



Andrea Rossi made this comment on the Journal of Nuclear Physics:

Andrea Rossi
June 2, 2016 at 4:30 PM

William:

Thank you for this important link with the press release issued today from my attorney John Annesser, Esq.
We made this move to make clear a thing about which there has been a lot of confusion, because IH continues to make patent applications with my technology, using without my authorization my name as the inventor and the name of Industrial Heat as the assignee.

It must be clear and sound that Leonardo Corporation has terminated the license granted to Industrial Heat LLC in all the following Territories:
North America, Central America, South America, the Caribbean, China, Russia, Saudi Arabia, and the Emirates.

This press release of our Attorney is clear and straight to the point.
Warm Regards,

A.R.



Two things seemed to have happened today, one was a suspected good conclusion to Rossi's one week E-Cat X trial and the other was the de-licensing Industrial Heat in order to clear the decks for Rossi's next larger deal with his new licensees.

The Quark x seems to move along now independently and cleanly into the focus of things, with Industrial Heat losing all rights to selling anything with the revocation of their old IP license to the old E-Cat tech on grounds of non-payment.  

There may be a court fuss from I.H. and Woodford over losing rights to this old tech, but it clarifies the separation between E-Cat and QuarkX very clearly.  

I.H. and Woodford never had any stake in Quark X ever, and only had sales rights to the 3-6 COP E-Cat as granted by the original agreement anyway.   The 50 COP results of the year long test were COMPLETELY DENIED by IH, so with I.H.'s complete denial of the test results and their refusal to meet contractual obligations, that goes away too.

This however does not stop I.H.'s little fingers from making whatever they can and trying to sell it using the 3-6 COP IP pending the final conclusion of the court case.   However, their customers would be well advised to consider if Rossi's stolen IP is an integral part of those products, since Brillouin never used lithium in his designs until I.H. illegally shared Rossi's IP with Brillouin.

A single Quark does not last very long compared to the one year 1 megawatt units that did last an entire year.   Some clever system of moving the individual Quarks around must be designed and tested for larger heat production plants.

Quark burns very brightly though -- at rates and heats that could melt down most of the steels and some of the ceramics very very quickly.

Once again, a clever replacement system of the little Quark units will be needed.  

Each separate QuarkX resembles a cigarette or a pencil in length and thick.   They are perhaps square, instead of round, but I have used round symbols below for convenience.

Set up 5 vertical magazines of unconnected QuarkX's coming down the magazine under spring finger retention, being driven one pencil width per staging click -- being driven from the top of each magazine stack (driven separately) dropping free of the spring fingers at the bottom of the reactor after many progressive single width pushes.
Each separate QuarkX resembles a pencil in length and thick.   The ones that are driven (or the ones used to collect electricity) will have contact touch caps on the end, sorta like an old style fuse cartridge.  Since commonality is nice, they all may be the same exact unit.

They may be square, instead of round, but I have round symbols below for convenience.

Set up 5 vertical magazines of unconnected QuarkX's coming down the magazine under spring finger retention, being driven one pencil width per staging click -- being driven from the top of each magazine stack (driven separately) dropping free of the spring fingers at the bottom of the reactor after many progressive single width pushes.


00000
00000
00000
00000
00000      mouse activation zone
00000
00000
00000
00000      mouse activation zone


Set up your rig to energize the red one as the Mouse to run all the rest as passive CATs.   Collect electricity from the rows and levels inside the excitation zone.  Sense burn out on each stack with temperature sensors aimed at the bottom most QuarkX and progress each stack individually one click as the QuarkX on the bottom gets relatively cold (used up).   Obviously, the Mouse vertical stack will progress to burn out quicker than the rest, but that's ok as it still gets used up completely.

Let'em get as hot as they want to since they can't melt down any more.   Lots & lots of heavy duty heat,  doing it this way a 1 megawatt plant might be quite small, you know.   Use of a nuclear heat transfer fluid system instead of direct steam generation will likely be used on larger plants. but auto sized stuff will likely still use direct steam generation to save size and weight.

There will be some waste involved, but Rossi understands that running a reactor to the bitter end takes full time expertise tweaking it and this method does not.

You could "use them up totally" by feeding all the drop free units back through the one of the side Mouse stacks.  This would allow each little bit of stuff to get used up as the "use up side stack" is monitored by separate feedback electronics and can have several different "excitement" program stages to maximize the total complete use up of that use up stack.



Plus, you could make you some bigger pencils for a heavier duty plant, you know .....

So, my fictitious steam cycle now has an electric motor inside the front hub, uses dynamic braking off that DC motor for "slow brake action" and has a disc brake on the front wheel for hard braking

The rear hub has a one way sprag clutch drive for the direct action steam cylinders (one on each side of the  frame, 180^o out so the exit steam from the little high pressure one goes directly into the other bigger, low pressure cylinder acting on the return stroke 180^o and the timing all works out naturally).    

It also has a natural brake available internal to the rear hub for rapid hard braking.   (ever try "engine braking" on a steam engine ?? -- it is called sliding the rear tire as you will NEVER roll over a steam engine during any sort of reverse braking action unless you open up some valves to cut off most of the compression.   Hey, you could do this in a varying amount by using a computer controlled decompression "variable valve" and literally using the rear connection hub as a big arsed brake if you had to)

There is a post second cylinder very low pressure radiator, for steam to water recovery, and a low mounted water tank and a battery to support cold start up, control circuits, lights, horn etc.

Such a bike is actually an all wheel drive unit and uses all of the available energy at approximately 30-40% efficiency.    The very low cost of the QuarkX steam power makes this cycle cost only pennies per day to run, so it is just all about being clean and efficient by requiring fewer water ups per trip.

Note this bike uses the electrical power generated by QuarkX as headlights, systems battery recharge and front wheel electric drive energy .....  nothing gets wasted.

And yes, your bike could power your campsite and by a low pressure hot water/steam line and a small radiator it could heat your tent too.

And for winter riding, a "warm suit" connected to the same pop in connector, yes?