SuzukiSavage.com - Replacing oil sight window?

Donate!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Replacing oil sight window?

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Send Topic

Print

Replacing oil sight window? (Read 88 times)

Moto Duck YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 5	Replacing oil sight window? 10/16/14 at 15:42:24 We need to have our engine side covers powdercoated as part of a custom job I'm doing on my girlfriends Savage. Can anybody tell me what I need to do to remove and then reinstall the oil sight window? It looks like it has a rubber seal on the outside and some sort of adhesive sealant on the inside. Thanks!
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28834 L.A. California Gender:	Re: Replacing oil sight window? Reply #1 - 10/16/14 at 16:52:54 Mine came loose at one point and I popped it out gooped it back up and stuck it in. Nothing but the rtv holds it in.
Back to top	Versey's Place Tech Section Index IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Replacing oil sight window? Reply #2 - 10/16/14 at 20:21:10 verslagen1 wrote on 10/16/14 at 16:52:54: Mine came loose at one point and I popped it out gooped it back up and stuck it in. Nothing but the rtv holds it in. Not what I wanted to hear,,
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Dave YaBB Moderator ModSquad Offline SuzukiSavage.com Rocks! Posts: 17893 Camp Springs, Kentucky Gender:	Re: Replacing oil sight window? Reply #3 - 10/17/14 at 04:55:24 When I took my case off to polish it, I found the white sealer that was applied at the factory was loose and I just pulled it off. I cleaned the area well and put JB Weld around the edges. I have never tried to push the glass out however........
Back to top	Someday I will be old......But not today! IP Logged

Colxjon YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 42	Re: Replacing oil sight window? Reply #4 - 10/21/14 at 17:53:44 Just had my controls powder coated and the guy had to take out the sight glass on the master cylinder. I ended up buying a watch crystal that was the same diameter as the old one and used some clear epoxy... Haven't put brake fluid in it yet but hopefully it holds.
Back to top	IP Logged

Pages: 1

Send Topic

Print

‹ Previous topic | Next topic ›

« Home