Hey!
Fork seal replacement is fairly easy.
What is basically involved is shown on this video:
https://www.youtube.com/watch?v=klaPwtm2AX0Once you have the front end disassembled and just have to forks out you will need to basically tug out the inner tube to get the fork seal out (after you've removed the retention clip and damper bolts.)
Once you have the inner tube out along with the old fork seal.. remove old fork seal.
Reassemble the inner fork components and use a 1.5 inch PVC pipe to slip in the bushing onto place. After the bushing and the washer is in place use that same PVC pipe to push a new oil soaked seal.
Reassemble everything and you are done.
EDIT:
More resources for you:
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1300797103/15http://www.chopcult.com/forum/showthread.php?t=7129