SuzukiSavage.com - Picked up a new to me Savage!

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Picked up a new to me Savage!

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2

Picked up a new to me Savage! (Read 235 times)

Uppercut YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 7 Easton, MA Gender:	Re: Picked up a new to me Savage! Reply #15 - 06/20/13 at 06:28:44 Ah ok, I see the washer on the fiche now, thanks. And yea, still debating whether I should go ahead and just do the washer mod while I have the carb apart, even thought the bike is stock.
Back to top	IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 17832
Camp Springs, Kentucky
Gender: male

Re: Picked up a new to me Savage!
Reply #16 - 06/20/13 at 06:37:27

Uppercut wrote on 06/20/13 at 06:28:44:

Ah ok, I see the washer on the fiche now, thanks.

And yea, still debating whether I should go ahead and just do the washer mod while I have the carb apart, even thought the bike is stock.

At a minimum you should reduce the size of the white spacer on top of the needle. Replace the white spacer with a 2-3 washers that are equivalent to about half the thickness of the white spacer. That is the most significant change you can do to improve the performance of the bike.....it will run much smoother after you do that.

Someday I will be old......But not today!

IP Logged

Pages: 1 2

‹ Previous topic | Next topic ›

« Home