SuzukiSavage.com - Stripped Cyl Head bolt threads (the long one)

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Stripped Cyl Head bolt threads (the long one)

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1 2 3

Stripped Cyl Head bolt threads (the long one) (Read 551 times)

noah7324290 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	Re: Stripped Cyl Head bolt threads (the long one) Reply #15 - 02/17/15 at 15:29:16 I bought the bolt the person before me had posted and it's double side threads and when I have it in and tight the oil still comes out cause there's no bolt at the end just threads in pissed I got this and have to make mods I should've just got a 135mm
Back to top	IP Logged

Steve H Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 1223 Spartanburg, SC Gender:	Re: Stripped Cyl Head bolt threads (the long one) Reply #16 - 02/17/15 at 16:17:09 If I am thinking correctly here, the one end screws into the block and the other, sticking up out the top, should have a nut and washer on it. Somebody please correct me if I am wrong.
Back to top	87 LS650, 2005 Ninja 250, 2009 Yamaha C3, 2001 Honda Reflex. On 2 wheels since 6/80. IP Logged

noah7324290 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	Re: Stripped Cyl Head bolt threads (the long one) Reply #17 - 02/17/15 at 16:43:56 Yea but the one the guy said he used was double threaded
Back to top	IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18115
Camp Springs, Kentucky
Gender: male

Re: Stripped Cyl Head bolt threads (the long one)
Reply #18 - 02/17/15 at 17:54:17

If you got the one that is threaded on both ends - the you need to clean and apply a silicone sealant on the washer and nut when you install it...this bolt originally had a sealing washer on it. You need to get the top sealed as this bolt has oil pressure against it. (An acorn nut would be ideal is you have the length of the stud exactly right).

Someday I will be old......But not today!

IP Logged

noah7324290 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	Re: Stripped Cyl Head bolt threads (the long one) Reply #19 - 02/25/15 at 13:29:33 It won't let me post the pic off my phone
Back to top	IP Logged

noah7324290 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	Re: Stripped Cyl Head bolt threads (the long one) Reply #20 - 02/25/15 at 13:31:41 Hopefully this will work
Back to top	1424899965403.jpg IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28890 L.A. California Gender:	Re: Stripped Cyl Head bolt threads (the long one) Reply #21 - 02/25/15 at 14:17:43 as long as you have rtv between each washer it should work.
Back to top	Versey's Place Tech Section Index IP Logged

noah7324290 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	Re: Stripped Cyl Head bolt threads (the long one) Reply #22 - 02/27/15 at 06:30:25 I got a heli coil kit and I'm going to pull the head off soon to install it how bad is it removing and re installing the head and cylinder jug
Back to top	IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18115
Camp Springs, Kentucky
Gender: male

Re: Stripped Cyl Head bolt threads (the long one)
Reply #23 - 02/27/15 at 06:44:06

noah7324290 wrote on 02/27/15 at 06:30:25:

I got a heli coil kit and I'm going to pull the head off soon to install it how bad is it removing and re installing the head and cylinder jug

You will have to pull the engine out of the frame - or at a minimum get all the mounting bolts out so that the engine can be tipped in the frame. The cylinder will not come off with the engine mounted to the frame.

Someday I will be old......But not today!

IP Logged

justin_o_guy2 Serious Thumper Offline What happened? Posts: 55279 East Texas, 1/2 dallas/la.	Re: Stripped Cyl Head bolt threads (the long one) Reply #24 - 02/27/15 at 07:48:19 Sometimes just stopping by a machine shop and talking to someone is a good plan. An offer to sweep up or empty trash gets busy people's attention. Are the threads in the case?
Back to top	The people never give up their liberties but under some delusion.- Edmund Burke. IP Logged

Dave

YaBB Moderator
ModSquad

Offline

SuzukiSavage.com
Rocks!

Posts: 18115
Camp Springs, Kentucky
Gender: male

Re: Stripped Cyl Head bolt threads (the long one)
Reply #25 - 02/27/15 at 07:53:28

justin_o_guy2 wrote on 02/27/15 at 07:48:19:

Sometimes just stopping by a machine shop and talking to someone is a good plan. An offer to sweep up or empty trash gets busy people's attention.
Are the threads in the case?

Nope...it is the long stud in the right rear of the cylinder - the one that is also the oil galley to the head.

Someday I will be old......But not today!

IP Logged

noah7324290 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	Re: Stripped Cyl Head bolt threads (the long one) Reply #26 - 02/27/15 at 12:33:25 Im working on getting the top of the head off there is so much gasket sealer holding it on it won't budge lol this things is a mess
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28890 L.A. California Gender:	Re: Stripped Cyl Head bolt threads (the long one) Reply #27 - 02/27/15 at 12:37:49 print yourself a copy of the bolt pattern so you know which bolts go where and which ones must be removed.
Back to top	Versey's Place Tech Section Index IP Logged

noah7324290 YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 8	Re: Stripped Cyl Head bolt threads (the long one) Reply #28 - 02/27/15 at 12:46:13 I have the Clymer manual but it's not really telling me how it not specific plus there was a rusted bolt that broke off so now I have to extract it
Back to top	IP Logged

verslagen1 YaBB Moderator ModSquad Offline Where there's a will, I want to be in it. Posts: 28890 L.A. California Gender:	Re: Stripped Cyl Head bolt threads (the long one) Reply #29 - 02/27/15 at 14:00:28 http://suzukisavage.com/cgi-bin/YaBB.pl?num=1099227295
Back to top	Versey's Place Tech Section Index IP Logged

Pages: 1 2 3

‹ Previous topic | Next topic ›

« Home