Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
HOW TO factory petcock swap w/ Raptor 660 video (Read 2171 times)
YaBB Newbies

Its a real THUMP in
the pants!

Posts: 38
Portland/Corpus Christi, TX.
Gender: male
HOW TO factory petcock swap w/ Raptor 660 video
09/07/11 at 10:58:05
Below are the links to a STEP-BY-STEP videos I did of changing out the factory petcock with the Raptor 660. Note that it is 3 parts. Hopefully, this will take out ANY confusion (as if there were any) on changing out the factory petcock!

Part 1/3

Part 2/3

Part 3/3

Back to top

"Life is like a bath; the longer you stay in it, the more wrinkled you get!" -Garfield
  IP Logged
YaBB Moderator

Posts: 17432
Camp Springs, Kentucky
Gender: male
Re: HOW TO factory petcock swap w/ Raptor 660 vide
Reply #1 - 08/08/13 at 04:16:00
Off topic replies have been moved to this thread.

The posted videos on this topic are long overdue.  I used a rubber vacuum plug on the right side of the carb and it worked fine.  You can get these at any auto supply store and for me the vacuum plug held up fine and looked like it belonged there.   I had read about Pine having a rubber vacuum cap deteriorate I kept a spare in the tool kit just in case I needed it.....but I never did in the year that I used that carb.

Back to top
« Last Edit: 08/19/13 at 07:24:42 by Dave »  

Someday I will be old......But not today!

  IP Logged
Pages: 1
Send Topic Print

« Home

« Home
12/06/23 at 05:34:22

General CategoryTechnical Documents/Reference › HOW TO factory petcock swap w/ Raptor 660 video » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.