SuzukiSavage.com - Fitting Savage sissy bar onto S40

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › Rubber Side Down! › Fitting Savage sissy bar onto S40

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Fitting Savage sissy bar onto S40 (Read 73 times)

BuckRYCA Senior Member Offline Posts: 258 New London, CT, USA Gender:	Fitting Savage sissy bar onto S40 09/01/11 at 07:45:22 Sissy bar was standard on the Savage. Not standard on the S40. Anyone have any experience fitting a Savage sissy bar onto an S40?
Back to top	'96 Savage - now a Ryca CS-1 IP Logged

arteacher

Serious Thumper

Offline

Ride as if your
naked and invisable!

Posts: 2581
London ontario
Gender: male

Re: Fitting Savage sissy bar onto S40
Reply #1 - 09/01/11 at 08:00:33

I have put a 2001 sissy bar on my '07.There are some differences.
First: the rails are 1/4" narrower, so you need bolts 1/4" shorter. Second: the rails sit out a bit further from the fender so I used door edge molding to make up the difference.
On mine I have the Suzuki saddle bag guards which just happen to require bolts that are 1/4" longer, so I used the original bolts and only had to grind down two of the six bolts.
Also the upholstery on the backrest pad does not have any pattern on it so it does not perfectly match the seat. And tape the fender or you will scratch it for sure.

white '07, Raask exh, Corbin seat, slipstreamer shie, Raptor, Routy's fwd controls, Baron tach, Frisco bars, Isogrips, Headlight and taillight modulators, Dial-a- jet, AME 9 deg chop kit, K&N air flt

IP Logged

BuckRYCA Senior Member Offline Posts: 258 New London, CT, USA Gender:	Re: Fitting Savage sissy bar onto S40 Reply #2 - 09/01/11 at 14:04:46 Thanks! Very useful answer you provided.
Back to top	'96 Savage - now a Ryca CS-1 IP Logged

arteacher Serious Thumper Offline Ride as if your naked and invisable! Posts: 2581 London ontario Gender:	Re: Fitting Savage sissy bar onto S40 Reply #3 - 09/01/11 at 15:31:37 You are welcome. Glad I could help.
Back to top	white '07, Raask exh, Corbin seat, slipstreamer shie, Raptor, Routy's fwd controls, Baron tach, Frisco bars, Isogrips, Headlight and taillight modulators, Dial-a- jet, AME 9 deg chop kit, K&N air flt IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home