2003 savage...
has new slip on harley exhaust # 64941-01
Ok I finally have pulled the carb on a lean/hot running bike that performs well….
pulled plug and its dry grey ....
Dropped bowl on bottom and ,I found that I have a 52.5 for a pilot and have a 55 from lancer here so going to put that in…
Also the main is a 155… think I may stay with that rather than go with the 150 I have here…
Top of carb under needle diaphragm I found smaller jet a 45..
Bigger jet under diaphragm is a 230…
After taking screws out of needle I found that I had two metal washers….. if? there was a third I sure could not get it out of there..
Put two washers back in that fell out and screws and plate… reassembled…
I have the bike in shambles right now as I am doing all sorts of things before I put her back together again…
The carb was on this list…
Having some issues with adjusting the valves though..?
maybe my aircooled vw’s just have me spoiled is all..