SuzukiSavage.com - Not a New Topic

DirtySavage

YaBB Newbies

Offline

Wow, wow.. Pow, pow!

Posts: 46

Gender: male

Not a New Topic
07/20/09 at 11:20:39

Guys, help me out. I'm working on my wifes bike as a surprise while she is at a training class. I need to know what combination of jets will work with a Jardine exhaust and the Universal K&N filter (RU-1750).

There is so much on here about different jetting it gets a little confusing and overwhelming. I have turn the mixture screw out quite a bit and it still is cutting out/fuel starved at full throttle.

Thanks!

Back to top

IP Logged

Moofed Full Member Alliance Member Offline ...and the engine just gleams... Posts: 148 Bloomington, Indiana Gender:	Re: Not a New Topic Reply #1 - 07/20/09 at 11:23:45 mix screw has practically no effect at full throttle. You'll want a 152.5 or 155 main, and probably a 55 pilot jet too. Don't forget about the white spacer either.
Back to top	IP Logged

DirtySavage YaBB Newbies Offline Wow, wow.. Pow, pow! Posts: 46 Gender:	Re: Not a New Topic Reply #2 - 07/20/09 at 11:53:30 So your saying I should us a 155 main and a 55 piolt with the spacer mod for this particular set up? Thanks
Back to top	IP Logged

PTRider

Senior Member

Offline

Posts: 397

Re: Not a New Topic
Reply #3 - 07/20/09 at 13:06:47

Jetting info:
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1244217127/0#0
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1157720585

The idle mixture screw and pilot jet control the first third of the throttle range.

The needle jet position controls the middle third. Shorten the white spacer as needed.

The main jet controls the max third of the throttle range. Yes, 155 is probably good for your set up.

Back to top

IP Logged

Yonuh Adisi FSO

Serious Thumper

Offline

Savage Jedi (Knight)

Posts: 3622
Pilot Valley NV, aka Tatooine
Gender: male

Re: Not a New Topic
Reply #4 - 07/20/09 at 13:12:29

DirtySavage wrote on 07/20/09 at 11:20:39:

Guys, help me out. I'm working on my wifes bike as a surprise while she is at a training class. I need to know what combination of jets will work with a Jardine exhaust and the Universal K&N filter (RU-1750).

There is so much on here about different jetting it gets a little confusing and overwhelming. I have turn the mixture screw out quite a bit and it still is cutting out/fuel starved at full throttle.

Thanks!

Altitude?

You can't just copy someone elses set-up, you have to set it up for your area.

If it is cutting out and fuel starved at full throttle, check that vacuum line as well. That is the usual culprit on high RPM issues like you describe.

Back to top

Check out Flight of Destiny http://www.amazon.com/dp/B00H9130XC

IP Logged