eanon
Full Member
Offline
Thump-Thump-Thu mp
Posts: 219
Austin, Texas
Gender:
|
So when the previous owner laid her down, it looks like the force of the impact rotated the handlebars a little. I only noticed because I can't seem to get the right side mirror properly adjusted, and the brake handle assembly was rotated back toward the rider a little. I had to take the two covers off of the bolts holding the brake handle assembly to get it back into place, and just destroyed them. Does anybody know of a good way to get those darn bolt covers off without destroying them? By bolt covers, I mean those little silver, plastic caps that suzuki puts in the top of the hole the bolt goes in to keep out water and clean up the look a little. I need to loosen up the 4 bolts holding the handlebars in place so I can put them back where I want them, but those bleeping covers are in the way. I know I can get them out by breaking them, but there has got to be a better way.
|
Back to top
|
Red '97, cone filter, 150 main, 52.5 Pilot, half spacer, Screaming Eagle turnout, 17/43 chain drive, shield, de-badged, 4" forward control extensions. Gettin' there.
IP Logged
|