Home
Forum
Search
Login
Register
Merch
Donate
Welcome, Guest. Please
Login
or
Register
::
View Members
SuzukiSavage.com
›
General Category
›
Rubber Side Down!
› A good wrenching day today
(Moderators:
verslagen1
,
Dave
,
Serowbot
)
‹
Previous topic
|
Next topic
›
Pages: 1
A good wrenching day today (Read 0 times)
911radioman
Ex Member
A good wrenching day today
04/24/06 at 18:44:32
Got my #55 pilot jet and new front brake pads from Dennis Kirk today.
Pilot jet installed without a hitch, I did notice that it is the bleed type whereas the OEM pilot was not. Don't guess that makes a difference...
Front brakes were a piece of cake to swap out. I went with the SBS pads. They are as quiet as can be as opposed to the OEM pads. The old pads had just about ran their course, so it was time to change them. I guess 6400 miles is decent for the original pads.
I think I just about have the carb dialed in, maybe a tweak here or there. I'm right at about 1 3/4 turns out on the pilot, and it seems to be doing OK with no backfires so we'll see how that does over time. May have to tinker a bit more if it doesn't cut it out all the way.
So, all in all, it was a good wrenching day today!
Back to top
IP Logged
Reelthing
Serious Thumper
Alliance Member
Offline
Fish or ride that is
the question
Posts: 5397
Houston,Tx
Gender:
Re: A good wrenching day today
Reply #1 -
04/24/06 at 20:10:38
Good job, sounds like your having fun!
on the carb - yes when you get it that close it's like 1/16 turns from there - and you might want to tweak the idle speed ever so slight as well
on the brakes - I see a lot of questions lately on them - now that you've done it once - think about the 2nd or 3rd time - takes maybe 5 minutes - maybe - me I don't run a set of pads very far couple thousand miles or some noise and they go in the trash - just too cheap and too easy to change to do otherwise.
Back to top
IP Logged
steelwolf
Serious Thumper
Offline
"I'm a cowboy,
on a steel horse I
ride."
Posts: 847
Trinity, NC
Gender:
Re: A good wrenching day today
Reply #2 -
04/24/06 at 20:27:54
Ditto on the Idle adjust. I had to run mine up a little too.
Back to top
IP Logged
Pages: 1
‹
Previous topic
|
Next topic
›
Forum Jump »
» 10 most recent posts
» 10 most recent topics
General Category
»» Rubber Side Down!
- Technical Documents/Reference
- The Marketplace
- The Cafe
- Politics, Religion (Tall Table)
- Forum Upgrade Issues / Tests
« Home
« Home
SuzukiSavage.com
05/06/24 at 23:47:42
›
General Category
›
Rubber Side Down!
› A good wrenching day today
SuzukiSavage.com
» Powered by
YaBB 2.2
!
YaBB
© 2000-2007. All Rights Reserved.