Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1 2 
Send Topic Print
Baffle Removal (Read 153 times)
ThumperPaul
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 1721
Houston, Texas
Gender: male
Re: Baffle Removal
Reply #15 - 09/27/24 at 09:27:20
 
What’s in the stage 1 kit?

A 50 pilot jet and 150 main jet should be the biggest jets you need. Narrow down the white spacer on the needle some or get a couple washers at the hardware store to replace the white spacer.  I think 2 number 4 washers should do it.

White spacer mod ---> https://suzukisavage.com/cgi-bin/YaBB.pl?num=1104205157/0
Back to top
 
« Last Edit: 09/27/24 at 11:42:24 by ThumperPaul »  
  IP Logged
TheBabyDerp
YaBB Newbies
*
Offline

SuzukiSavage.com
Rocks!

Posts: 16

Re: Baffle Removal
Reply #16 - 09/27/24 at 12:09:38
 
Not sure off the top of my head. I will check when I get home from work. I will read into the white spacer mod. I plan on doing a cam/piston upgrade down the line. I heard the Mikuni's were superior. Any thoughts on that?
Back to top
 
 
  IP Logged
LANCER
Serious Thumper
Alliance Member
*****
Offline

Savage Beast
Performance Parts

Posts: 10668
Oklahoma
Gender: male
Re: Baffle Removal
Reply #17 - 09/27/24 at 15:43:46
 
Did you receive genuine Mikuni jets and parts ?
If not, that could be troublesome.
Back to top
 
 
  IP Logged
ThumperPaul
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 1721
Houston, Texas
Gender: male
Re: Baffle Removal
Reply #18 - 09/28/24 at 04:11:56
 
To Lancer’s point, you want genuine Mikuni jets for the stock CV carb or if you switch to a Mikuni VM36 slide carb.  Lancer sells a VM36 carb kit and also genuine Mikuni jets for either carb.  As well as his other goodies - hot cams and pistons.

The 6sigma website is a bit of a black box.  Even when I added the stage 1 kit to my cart (playing around with them), it didn’t tell me what I would get for $50+ bucks.  No thanks.

If you don’t want to buy through Lancer, you can buy genuine Mikuni jets from JetsRUs.com.  They are like $5-$8 each and like $8 shipping.  That’s much better than a $50 kit that you don’t know what you’re getting.  They also have the “washer/spacers” for the needle, or you can get a half-dozen of the right sized washers at a hardware store for less than $1.

The Mikuni VM36 is a great carb.  Lancer and his followers can attest and he’s sold many to happy members.  I like the VM36 a lot.  I also like the Keihin PWK38 a lot.  The biggest difference when running a slide carburetor is throttle response.

DragBikeMike did a great “carburetor shootout” technical post comparing several carbs.  Link here —> http://suzukisavage.com/cgi-bin/YaBB.pl?num=1585461605



Back to top
 
 
  IP Logged
Ruttly
Serious Thumper
*****
Offline

Thumpers Rule

Posts: 5112
Manteca , CA
Gender: male
Re: Baffle Removal
Reply #19 - 09/28/24 at 09:21:08
 
Derp , The Mikuni VM36 or VM38 both are fantastic carbs. Easy to tune , easy to get jets  and parts. Once tuned properly , it’s all throttle. You will wonder why you even bothered with the stock carb , that can be troublesome. 36mm for a stock engine & 38mm for a modded engine. It makes a huge difference in acceleration. The VM carb has been quite literally used on a million race bikes in the last 65 years. Why ? Because it works !!
Back to top
 
 

The Topic Terminator
  IP Logged
ThumperPaul
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 1721
Houston, Texas
Gender: male
Re: Baffle Removal
Reply #20 - 09/28/24 at 10:46:35
 
Great testimonial, Ruttly!  Where do you draw the line on stock vs modified?  I think Lancer tried the 38mm with his hot rod and dropped down to the 36mm for better performance.  My memory is bad, but I think it had to do with the velocity of the mixture through the intake valves into the motor or maybe it was better fuel atomization (or both).

I’m toying with the idea of experimenting with a PWK36 instead of my PWK38.  My bike is what I’d consider stock - just a UNI foam filter and Dyna muffler (no hardcore Stage 3 stuff like hot cam, hi-comp piston, bigger valves, porting, etc…).
Back to top
 
 
  IP Logged
Ruttly
Serious Thumper
*****
Offline

Thumpers Rule

Posts: 5112
Manteca , CA
Gender: male
Re: Baffle Removal
Reply #21 - 09/30/24 at 10:47:31
 
Stock or modified would relate to engine internals. Carb and exhaust mods still stock. Porting , oversized bores & camshafts, etc , now your in the modified camp.  I don’t build radical engines anymore. I build fun , forgiving & fast engines. My preference is the VM38 for my bike. It has some mods too. I have no experience with the PWK , but decades with the VM. For me a big single is satisfaction personified. My tracker is my daily , she has earned her nickname (The Healer). It’s not how is looks , she’s a looker , it’s about how she makes you feel. It’s my mental reset button , the difference of how you felt when you got on as to when you get off. 0 , zip , nada flat spots in acceleration , all throttle , idle to WOT , super linear , smooth , powerful and so so satisfying !  Cool
Back to top
 
 

The Topic Terminator
  IP Logged
JOG
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 674
Longview, Texas
Gender: male
Re: Baffle Removal
Reply #22 - Yesterday at 22:33:42
 
I'm in favor of Baffle removal. I'd feel a lot better about it all if I wasn't baffled by what I'm watching.

If it leans through corners it's got Healing properties. Having the Oomph to accelerate Out of a corner increases the rate of healing.
Honing riding skills, reading Twist of the Wrist ,YouTube , learning how to use what it will do right up to Sphincter Clinch,, and if you're the Skilled rider I am, being able to use everything it can do is beyond what is going to happen.
I guarantee you every gun I own is a more accurate Thing than I can be.
And every bike I ever had was able to Do a lot more than I could ever get out of it.
Back to top
 
 
  IP Logged
Pages: 1 2 
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
10/02/24 at 01:22:16



General CategoryRubber Side Down! › Baffle Removal


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.