swedishbiker wrote on 11/20/13 at 01:28:25:94mm piston and 94mm stroke, about 1mm would give 10.
I appreciate the response, but isn't that estimate a bit over simplistic?
The calculation needs to be a factor of the reduction in the size of the combustion chamber, that which is not entirely a continuation of the tubal cylinder, but rather a partial hemisphere.
The trouble in making this calculation really is estimating this partial hemisphere and all the bits it contains... rather than trouble with merely calculating the reduction in the displacement by removing the gasket itself.
Anyone have the actual displacement measure of the combustion chamber itself?
How does one even make this measure, if it is not supplied in specifications?
I suppose one could use a measured syringe filling the chamber with a liquid...