SuzukiSavage.com - 94mm flat-top dished pistons 10.5:1 CR

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › The Marketplace › 94mm flat-top dished pistons 10.5:1 CR

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

94mm flat-top dished pistons 10.5:1 CR (Read 14 times)

LANCER

Serious Thumper
Alliance Member

Offline

Savage Beast
Performance Parts

Posts: 10820
Oklahoma
Gender: male

94mm flat-top dished pistons 10.5:1 CR
07/19/25 at 14:54:49

I’ve sold out of the 94mm Wiseco flat-top pistons and am considering another order of 12 (minimum required on a custom order).
To do so I need 5-6 prepaid orders to make this workable for me.
Anyone who is interested please respond, here or by text or email.

The process of going from time of order to receipt of the product is 4-6 weeks.

*********

🏍️ If the order for 12 units of the 94mm pistons is completed, I’m thinking of a batch of the 97mm pistons. If so, who might be looking for one or _ ?

IP Logged

DragBikeMike Serious Thumper Offline SuzukiSavage.com Rocks! Posts: 4565 Honolulu	Re: 94mm flat-top dished pistons 10.5:1 CR Reply #1 - Yesterday at 11:06:45 I am interested in both, 94mm & 97mm.
Back to top	Knowledge is power. IP Logged

LANCER Serious Thumper Alliance Member Offline Savage Beast Performance Parts Posts: 10820 Oklahoma Gender:	Re: 94mm flat-top dished pistons 10.5:1 CR Reply #2 - Yesterday at 18:32:25 DragBikeMike wrote on Yesterday at 11:06:45: I am interested in both, 94mm & 97mm. Just one each ?
Back to top	IP Logged

FinnHammer

Senior Member

Offline

Posts: 285
Denmark
Gender: male

Re: 94mm flat-top dished pistons 10.5:1 CR
Reply #3 - Yesterday at 23:13:42

I will take a 97mmm.
Regarding the 94mm, i think it would be a better solution to make it in an oversize, so that it will be nested into a freshly bored and honed, cylinder. Many cylinders will be worn, and the step just above where the rings reverse direction sits lower in the original piston than in the hi comp Wiseco, so this step has to be honed off, leaving a cylinder that may get close to worn out size.
Just my 10 cents.

An expert is a person who has made all possible mistakes within a narrow field - Niels Bohr

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home