My ongoing saga with this bike…. Went to move the bike in the garage….  It doesn’t want to roll easily in neutral.  It rolled fine a week ago so it’s not stuck brakes.  You know I have a piece of dowel rod in the cylinder but the engine can be rotated by hand at the crank.  It’s been sitting a few days with the oil drained out.  It’s about to get refilled today.  Would lack of oil cause the clutch plates to stick and bind together?  Note: there was about a quart of gas mixed in with about 2 quarts of oil when I drained it (from flooding carb I assume…. which is getting rebuilt today.).

I’m having so much fun.  I’m learning more about what not to do than I am about what I should do!  Good thing I have y’all so I’m not completely left unsupervised!!

yes it can stick with no oil, but you have to be in gear.

I think I’m in neutral. Or where neutral should be…. With everything else, it could be that simple.  Where I’m at, it seems a little easier than 1st gear.  I might be 2nd.  Feel like I’m losing my mind.