SuzukiSavage.com - Kawasaki 25T front pulley

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › The Marketplace › Kawasaki 25T front pulley

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

Kawasaki 25T front pulley (Read 43 times)

Armen

Serious Thumper

Offline

Half-Witted
Wrench-Jockey from
Jersey

Posts: 1431

Kawasaki 25T front pulley
06/08/23 at 05:20:46

I’ve got a few of the modified Kawasaki 25T front pulleys ready to ship.
Modified pulley, 2 button head stainless Allen screws, and a new lock tab.
This will lower your highway revs and make the bike sound more relaxed.
There is enough room in the adjuster to move the wheel forward and have adequate belt slack.
Really terrific write-up somewhere in the tech section.
Basically, remove the original front pulley, do a little grinding, and install the new stuff. Anti-seize on the splines, Loctite on the threads, torque the big honking nut, adjust the belt, and put the cover back on.
Not much more than that.
$160 with shipping in the USA.
Shoot me a note with questions.
Thanks,
Armen
For some reason, I can’t post a pic. Maybe I have to dumb down the size.
I’ll try again later.

« Last Edit: 06/14/23 at 07:52:54 by Armen »

In theory, theory and reality are the same. In reality, they aren't...

IP Logged

badwolf Serious Thumper Offline Ridin' my Lil' Bagger - 153k miles so far Posts: 793 Palm Beach County, FL Gender:	Re: Kawasaki 27T front pulley Reply #1 - 06/08/23 at 07:30:29 27 tooth?
Back to top	IP Logged

Armen Serious Thumper Offline Half-Witted Wrench-Jockey from Jersey Posts: 1431	Re: Kawasaki 25T front pulley Reply #2 - 06/08/23 at 07:32:28 I think so. 2 more than stock.
Back to top	« Last Edit: 06/14/23 at 07:53:30 by Armen » In theory, theory and reality are the same. In reality, they aren't... IP Logged

Gus Senior Member Offline Thumpers Rock! Posts: 491 Minnesota Gender:	Re: Kawasaki 27T front pulley Reply #3 - 06/14/23 at 07:50:39 Daves write up says stock is 23 tooth & the Kawa pulley is 25. I have one lying on my desk in front of me, I just counted the teeth and its 25 for sure.
Back to top	1994 BMW K75S 2011 s40 1979 Honda CT90 Trail 1964 Honda CT200 Trail One cylinder - one carburetor. Life is good! Retired/Minnesota IP Logged

Armen Serious Thumper Offline Half-Witted Wrench-Jockey from Jersey Posts: 1431	Re: Kawasaki 27T front pulley Reply #4 - 06/14/23 at 07:52:16 Oops. My bad. It’s been a while since I counted them. Two more than stock
Back to top	In theory, theory and reality are the same. In reality, they aren't... IP Logged

Armen Serious Thumper Offline Half-Witted Wrench-Jockey from Jersey Posts: 1431	Re: Kawasaki 25T front pulley Reply #5 - 06/15/23 at 15:01:11 Stock pulley and modified Kawasaki pulley. Stock is 23 teeth, Kawi is 25. This comes with a new lock tab thingie, and two stainless button head allen bolts.
Back to top	IMG_0395.jpeg In theory, theory and reality are the same. In reality, they aren't... IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home