I was out on the tracker the other day and she was a handful , not feeling on point. Sometime ago I had some loose spokes on the rear and I had tightened and half as$ed trued it. I think maybe the aluminum rim might be damaged(worn nipple holes) that make it impossible to properly true it. For not being a race bike it normally is very tight and when something isn’t right I notice it. Thought it might be low air but no. When Ryca had these wheels made I heard that they used the affordable rim and nipple holes had to be redrilled due to steep spoke angle of rear hub. Buchanan’s did such a nice job on the wheels for the BSA (Half Pint) , I’m gonna find me a box and send it ! Already have new Continentals & tubes ready and service the forks too while it’s down and oil & filter. I quite literally trashed the rear wheel , whole shots , jumping R/R crossings and just a good dose of abuse. It is , ok it was my daily and will be again soon. It’s such a fun bike to ride you can’t help but to test it and test it hard , it seems to respond best when abused ! I’ll also give that swingarm a close inspection for cracks. Tracker 3.0 will have to wait , not ready yet , I need her back on the road asap , maybe start on Tracker 3.0 in 2027. Until then she’s gonna cop some more abuse , ride it like you stole it !