Donate!
Welcome, Guest. Please Login or Register :: View Members
Pages: 1
Send Topic Print
DBM Earth friendly catch can with check valve (Read 51 times)
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28903
L.A. California
Gender: male
DBM Earth friendly catch can with check valve
09/02/22 at 14:26:33
 
I found a cheap oil catch can that I can add a check valve to run negative crank case pressure.

This is similar in function to DBM home made one.
http://suzukisavage.com/cgi-bin/YaBB.pl?num=1655271553

https://www.ebay.com/itm/333045868176
If the link doesn't work search "Cylinder Aluminum Oil Machine Tank Catch Can Reservoir Breather with Filter"

Also shown are the Umbrella Valves needed to modify the kit.
The ones I used are "Genuine James Gaskets" JGI-26856-89 Seal Unbrella Valve Rocker Cover
Back to top
 

OilCatchCanKit.jpg
WWW   IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28903
L.A. California
Gender: male
Re: DBM Earth friendly catch can with check valve
Reply #1 - 09/02/22 at 14:31:57
 
The Kit comes with 2 screw on intake baffles, 1 short, 1 long.
I used the short 1 incase I wanted to use the other as a cover.

Shown is the valve leaning on the long baffle.
And the installed modified baffle and valve.
Back to top
 

inside.jpg
WWW   IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28903
L.A. California
Gender: male
Re: DBM Earth friendly catch can with check valve
Reply #2 - 09/02/22 at 14:32:24
 
The baffle requires and easy mod to add the valve.
I chucked it in a lathe and drilled a 3/16" hole in the center.
This cut thru 2 holes but the valve tail pulled thru no problem and looks retained well enough.
Back to top
 

ShortBaffleBack.jpg
WWW   IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28903
L.A. California
Gender: male
Re: DBM Earth friendly catch can with check valve
Reply #3 - 09/02/22 at 14:32:37
 
Then I polished the valve surface as there were a lot of burrs in the original surface.
Back to top
 

ShortBaffleFront.jpg
WWW   IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28903
L.A. California
Gender: male
Re: DBM Earth friendly catch can with check valve
Reply #4 - 09/02/22 at 14:47:07
 
All that's left is put it together.

The Kit has a dip stick, you can use it or replace it with a metric screw.  It's the same as the side cover screws.

Screw the baffle/valve assy in and add the medium hose adapter on the inlet side.
You can throw a scrubby in the can if you want, then I would add the other baffle to protect the valve.

The kit comes with a filter if you want to exhaust to atmosphere or you could add another medium hose adapter and add a hose to the stock air box.  The kit has a hose if you want to use that.

I plan on routing it to my air intake when I get a round 2it.

All in all, it's a bit heavy, I thought the can would be thin metal, but it's quite thick.  The valve works quite well, you can't suck thru it, but you can blow quite easily.
Back to top
 

inside_001.jpg
WWW   IP Logged
DragBikeMike
Serious Thumper
*****
Offline

SuzukiSavage.com
Rocks!

Posts: 4411
Honolulu
Re: DBM Earth friendly catch can with check valve
Reply #5 - 09/02/22 at 19:19:45
 
Wow!  I have that exact same catch can.  I never used it.  I also thought it was heavy, but it's good quality.  Probably could lighten it up pretty easy.  The wall thickness on the can is a lot more than necessary.  Just chuck it up and thin out the wall on the can.

You did a stellar job on the umbrella valve.  The seat has a lot more flow area than the Hayden.  Can't wait to hear how it works.  Are you planning to do a manometer test?

Pretty cool Versy.  Cool
Back to top
 
 

Knowledge is power.
  IP Logged
verslagen1
YaBB Moderator
ModSquad
*****
Offline

Where there's a
will, I want to be
in it.

Posts: 28903
L.A. California
Gender: male
Re: DBM Earth friendly catch can with check valve
Reply #6 - 09/02/22 at 19:58:04
 
Thanks.

For less than $25 in materials I think it's great value too.
That Hayden was over $100 just for the valve.

There are some other kits that might be lighter for the same cost.
Back to top
 
 
WWW   IP Logged
Pages: 1
Send Topic Print


« Home

 
« Home
SuzukiSavage.com
11/04/24 at 02:16:24



General CategoryTechnical Documents/Reference › DBM Earth friendly catch can with check valve


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.