SuzukiSavage.com - 3d printing

Welcome, Guest. Please Login or Register :: View Members

SuzukiSavage.com › General Category › The Marketplace › 3d printing

(Moderators: verslagen1, Dave, Serowbot)

‹ Previous topic | Next topic ›

Pages: 1

3d printing (Read 62 times)

Newtbox YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 1	3d printing 02/27/22 at 13:55:34 does anyone here 3d print? Is there anyway you could 3d print a cover for the gas tank where the speedometer goes on a savage. I removed my speedometer for a digital one on the bars and don’t want a hole or the old speedometer
Back to top	IP Logged

Dan P YaBB Newbies Offline SuzukiSavage.com Rocks! Posts: 25 Northern Nevada Gender:	Re: 3d printing Reply #1 - 02/27/22 at 14:35:19 I would be interested too. Right now I'm going with the stock setup, because I didn't want the hole in the tank either.
Back to top	IP Logged

mdh152

YaBB Newbies

Offline

SuzukiSavage.com
Rocks!

Posts: 4

Re: 3d printing
Reply #2 - 04/14/22 at 21:19:52

Newtbox wrote on 02/27/22 at 13:55:34:

does anyone here 3d print? Is there anyway you could 3d print a cover for the gas tank where the speedometer goes on a savage. I removed my speedometer for a digital one on the bars and don’t want a hole or the old speedometer

Hi!

I do 3D printing and I'm proficient in CAD. Currently I do not currently have an ABS printer, however I'll likely be investing in one soon. This isn't a part I'd want to make out of PLA, PETG, etc. If you have any ideas for any other parts for this bike, let me know. I'm planning on making ABS parts for several different platforms at the moment.

IP Logged

Pages: 1

‹ Previous topic | Next topic ›

« Home