DragBikeMike
Serious Thumper
Offline
SuzukiSavage.com Rocks!
Posts: 4401
Honolulu
|
You probably want to have a #35 pilot jet in hand (along with #38 & #40). It is only available in genuine Keihin, the generics only go down to #38. One thing I found is that the slide needle affects idle mixture. Even with the #35 pilot jet, idle is a bit rich. Not bad, but a little fatter than I like. The DGK slide needle helps with that. Of course, that's all dependent on the size of the needle jet, if it's larger or smaller than .111", then you will have to figure out which slide needle is appropriate. There's a good chance that the as-delivered slide needle will work OK. If it gets to that LMK, I have a bunch of info on the slide needles.
If you reach the limit of patience with that throttle cable, the Barnetts that Lancer sells for the VMs work good (at least on my 2016 LS they work good).
Take heed on the ABS elbow. See my comments in my other report. The ABS falls apart. I switched to PVC. Hope that holds up better.
|