Donate!
Welcome, Guest. Please Login or Register :: View Members
SuzukiSavage.com › General Category › Rubber Side Down! › Intruder Shock Mounting
(Moderators: verslagen1, Dave, Serowbot) ‹ Previous topic | Next topic ›
Pages: 1
Send Topic Print
Intruder Shock Mounting (Read 40 times)
Mavigogun
Serious Thumper
*****
Offline

We roll farther
together

Posts: 775
Progressive Texas
Intruder Shock Mounting
12/20/20 at 22:07:24  
Will the stock bolts suffice, or will longer be required? I notice the shock features a recessed bolt hole unlike the stock shock- will the stock washer fit in there, or must a smaller part be resourced?

Thanks for any insight.
Back to top
 
 
2007 LS650 s40, presently being rebuilt
  IP Logged
Serowbot
YaBB Moderator
ModSquad
*****
Offline

OK.... so what's the
speed of dark?

Posts: 28387
Tucson Az
Gender: male
Re: Intruder Shock Mounting
Reply #1 - 12/21/20 at 07:37:28  
Stock bolts and nuts are fine,... washers?  I can't remember.
Do pay attention to clearances around the front pulley.
Especially if you still have the stock belt guard.  Some trimming may be necessary.
If you have the stock muffler, and rear footpegs there may be an issue as well.
Good time for a Shorty Sporty...

Good luck.  Cool
Back to top
 
 
Ludicrous Speed !... ... Huh...
  IP Logged
Pages: 1
Send Topic Print
‹ Previous topic | Next topic ›


« Home

 
« Home
SuzukiSavage.com
05/19/24 at 16:47:00



› General Category › Rubber Side Down! › Intruder Shock Mounting


SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.